2200 The following error occurred during a file operation: %1[ %{External/}%]%[, %{External/}%].
2201 The following error occurred while opening the file '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
2202 The following error occurred while closing the file '%{Note1/}' %1[: %{External/}%]%[, %{External/}%].
2203 The following error occurred while reading from the file '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
2204 The following error occurred while writing to the file '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
2205 Data that is not valid was read from the file '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
2206 An attempt was made to delete a file path without first initializing the parent directory.
2207 The following system error occurred from a call to GetFileTime: %1[ %{External/}%]%[, %{External/}%].
2208 The following system error occurred from a call to GetFileSize: %1[ %{External/}%]%[, %{External/}%].
2209 The following error occurred while the '%{pathfrom/}' file was being copied to the '%{pathto/}' file: %1[ %{External/}%]%[, %{External/}%].
2210 While attempting to cancel pending file operations, the following error occurred: '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
2211 While attempting a file seek operation, the following error occurred for file '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
2212 Error occurred during the creation of directory: '%{dir/}'.
2213 Error opening file; %{filename/} is not a disk file or file is not accessible.
2214 Error creating timer queue.
2215 Error creatinging timer.
2251 An attempt was made to open a file that is already open. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2252 The following file is corrupted: Physical file: %{PhysicalFile/}. Logical file %{LogicalFile/}.
2253 Internal server error: the existing logical file cannot be overwritten. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2254 The logical file cannot be found inside the physical file. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2255 Unable to set the end of the logical file within the physical file. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2258 SetEvent failed.
2259 The page size for the following file is not supported: Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2260 The background thread running lazy writer encountered an I/O error. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2261 A failure occurred while the file store was being cleared. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2262 Cannot write data to a read-only file; operation failed. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2263 The record ID is incorrect. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2264 The record exceeds the maximum size. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2265 A FileStore error from WriteFile occurred. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}. %1[: %{External/}%]%[, %{External/}%].
2266 A FileStore error occurred. Read/Write mode can only be changed from Write to Read. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}. %1[: %{External/}%]%[, %{External/}%].
2267 A FileStore error occurred while a record was being locked. This may be a read failure. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}. %1[: %{External/}%]%[, %{External/}%].
2270 Internal error: An attempt was made to set the file position past the end of file for a sequential read or write operation.
2271 An I/O error was encountered during a sequential read or write operation.
2272 An I/O error was encountered during a sequential read or write operation: %1[ %{External/}%]%[, %{External/}%].
2273 Memory allocation failed. Cannot complete the sequential read or write operation.
2274 The index data is damaged. Physical file: %{PhysicalFile/}. Logical file: %{LogicalFile/}.
2275 The '%{NodeName/}' node was not found in the configuration file.
2276 An unspecified error occurred while loading the '%{file/}' local cube DLL.
2277 An error occurred while opening the '%{file/}' local cube file.
2278 While attempting to read information from disk, a read error occurred for physical file: %{PhysicalFile/}, logical file: %{LogicalFile/}%1[: %{External/}%]%[, %{External/}%].
2279 The provided path '%{file/}' points to an existing file which cannot be opened.
2280 The number of connections to the local cube '%{file/}' exceeded the limit of '%{num/}'.
3002 An internal memory request exceeded the memory quota for the current processing action.
3003 The operation cannot be completed because the memory quota estimate (%d{Request/}MB) exceeds the available system memory (%d{Quota/}MB).
3004 While attempting to store a string, a string was found that was larger than the page size selected. The operation cannot be completed.
3800 OLE DB or ODBC error%1[: %{External/}%]%[; %{External/}%].
4600 COM error%1[: %{External/}%]%[; %{External/}%].
5400 An error occurred during a WinINet operation.
5900 Microsoft SQL Server 2005 Analysis Services
6209 The collation name cannot be resolved.
6210 The message manager for the default locale cannot be found. The locale will be changed to US English.
6211 The message definition XML contains a node that is not supported.
6212 The resource string cannot be loaded.
6213 Message cannot be generated for the following error code: %{result_code/}
6214 The message manager for the %{language/} locale cannot be found.
6215 The value of the '%{CodeType/}' code for the '%{FacilityName/}' facility in the message definition XML is not supported.
6500 The CACHE statement encountered a subcube with multiple granularities for an attribute.
6600 The %{dim/} hierarchy already appears in the %{axis/} axis.
6601 The %{name/} calculated member cannot be created because a member with the same name already exists.
6602 The %{name/} calculated member cannot be created because its parent is at the lowest level in the %{hier/} hierarchy.
6603 The %{name/} dimension attribute was not found.
6604 The %{strCubeName/} cube either does not exist or has not been processed.
6605 Aggregate functions cannot be used on calculated members in the Measures dimension.
6606 The dimension '%{name/}' was not found in the cube when the string, %{str/}, was parsed.
6607 The hierarchy '%{name/}' was not found in the cube when the string, %{str/}, was parsed.
6608 The level '%{name/}' object was not found in the cube when the string, %{str/}, was parsed.
6609 The member '%{name/}' was not found in the cube when the string, %{str/}, was parsed.
6610 Infinite recursion detected. The loop of dependencies is: %1[%{strName/}%]%[ -> %{strName/}%].
6611 The numeric expression evaluates to an unusable distance.
6612 ---.
6613 The %d{arg/} argument in the %{func/} function cannot be converted to a string.
6614 The '%{func/}' function cannot accept a null member as the %d{arg/} argument.
6615 The first argument of the 'Rank' function, a tuple expression, should reference the same hierarchies as the second argument, a set expression.
6616 The specified sets in the '%{func/} function have incompatible hierarchies at position %{iHier/}. The sets are incompatible.
6617 The set does not contain a hierarchy with the level specified.
6618 Too many arguments were passed to the %{func/} MDX function. No more than %ld{cMax/} arguments are allowed.
6619 Too few arguments were passed to the %{func/} MDX function. The function requires at least %ld{cMin/} arguments.
6620 No arguments were passed to the %{func/} MDX function, which requires at least %ld{cMin/} arguments.
6621 An expression was expected for the function argument and no expression was detected.
6622 The third argument of the Descendants function must be one of the following: SELF, BEFORE, AFTER, SELF_AND_BEFORE, SELF_AND_AFTER, BEFORE_AND_AFTER, SELF_BEFORE_AFTER, or LEAVES.
6623 The member and level in the Descendants function must belong to the same hierarchy.
6624 The expression in the %{func/} function cannot be converted to an integer.
6625 The CALCULATE statement cannot appear in the SCOPE statement body.
6626 The level ordinal is out of range in the %{func/} function.
6627 The '%{name/}' level does not exist in the cube.
6628 Range operator ( : ) operands have different levels; they must be the same.
6629 Range operator ( : ) operands have different hierarchies; they must be the same.
6630 A calculated member cannot be used as an operand of the Range operator ( : ).
6631 .
6632 .
6633 Axis numbers must be between 0 and 127.
6634 Axis numbers specified in a query must be sequentially specified, and cannot contain gaps.
6635 An axis number cannot be repeated in a query.
6636 The '%{hier/}' hierarchy appears more than once in the tuple.
6637 The CREATE MEMBER statement cannot appear in the SCOPE statement body.
6638 The CREATE SET statement cannot appear in the SCOPE statement body.
6639 Only one description may be supplied. The '%{strDesc/}' was supplied as part of a calculated cell and is redundant.
6641 A duplicate DISABLED property was supplied as part of a calculated cell definition.
6642 A duplicate CONDITION property was supplied as part of a definition of a calculated cell.
6643 A duplicate %{strPass/} pass number property was supplied as part of a definition of a calculated cell.
6644 A duplicate %{strPass/} pass depth property was supplied as part of a definition of a calculated cell.
6645 The '%{strDim/}' dimension contains more than one hierarchy, therefore the hierarchy must be explicitly specified.
6646 The %{func/} function expects a level expression for the %d{arg/} argument. A dimension expression was used.
6647 The %{func/} function expects a level expression for the %d{arg/} argument. A hierarchy expression was used.
6648 The %{func/} function expects a level expression for the %d{arg/} argument. A member expression was used.
6649 The %{func/} function expects a level expression for the %d{arg/} argument. A tuple expression was used.
6650 The %{func/} function expects a level expression for the %d{arg/} argument. A string or numeric expression was used.
6651 The %{func/} function expects a level expression for the %d{arg/} argument. A tuple set expression was used.
6652 The %{func/} function expects a dimension expression for the %d{arg/} argument. A level expression was used.
6653 The %{func/} function expects a dimension expression for the %d{arg/} argument. A hierarchy expression was used.
6654 The %{func/} function expects a dimension expression for the %d{arg/} argument. A member expression was used.
6655 The %{func/} function expects a dimension expression for the %d{arg/} argument. A tuple expression was used.
6656 The %{func/} function expects a dimension expression for the %d{arg/} argument. A string or numeric expression was used.
6657 The %{func/} function expects a dimension expression for the %d{arg/} argument. A tuple set expression was used.
6658 The %{func/} function expects a hierarchy expression for the %d{arg/} argument. A level expression was used.
6659 The %{func/} function expects a hierarchy expression for the %d{arg/} argument. A member expression was used.
6660 The %{func/} function expects a hierarchy expression for the %d{arg/} argument. A tuple expression was used.
6661 The %{func/} function expects a hierarchy expression for the %d{arg/} argument. A string or numeric expression was used.
6662 The %{func/} function expects a hierarchy expression for the %d{arg/} argument. A tuple set expression was used.
6663 The %{func/} function expects a member expression for the %d{arg/} argument. A level expression was used.
6664 The %{func/} function expects a member expression for the %d{arg/} argument. A tuple expression was used.
6665 The %{func/} function expects a member expression for the %d{arg/} argument. A string or numeric expression was used.
6666 The %{func/} function expects a member expression for the %d{arg/} argument. A tuple set expression was used.
6667 The %{func/} function expects a tuple expression for the %d{arg/} argument. A level expression was used.
6668 The %{func/} function expects a tuple expression for the %d{arg/} argument. A string or numeric expression was used.
6669 The %{func/} function expects a tuple expression for the %d{arg/} argument. A tuple set expression was used.
6670 The %{func/} function expects a string or numeric expression for the %d{arg/} argument. A level expression was used.
6671 The %{func/} function expects a string or numeric expression for the %d{arg/} argument. A tuple set expression was used.
6672 The %{func/} function expects a tuple set expression for the %d{arg/} argument. A level expression was used.
6673 The %{func/} function expects a tuple set expression for the %d{arg/} argument. A string or numeric expression was used.
6674 An overflow exists in the value of the calculation pass depth or number.
6675 A duplicate expression for the %{strPropName/} property was specified in the definition of a calculation.
6676 A duplicate SOLVE_ORDER value was specified in the definition of a calculation.
6677 The %{hier/} hierarchy is used more than once in the Crossjoin function.
6680 A member in the '%{attr/}' attribute has the unsupported '%{uop/}' unary operator value. Only the following unary operator values are allowed: +, -, *, /, or ~.
6681 The '%{name/}' function does not exist.
6682 Loading of the %{name/} assembly failed with the following error: %1[%{exception/}%]%[;%{exceptioninner/}%].
6683 Enumeration of types or functions through reflection in managed code failed with the following error: %1[%{exception/}%]%[;%{exceptioninner/}%].
6684 Execution of the managed stored procedure %{sproc/} failed with the following error: %1[%{exception/}%]%[%{exceptioninner/}%].
6685 Read access to the cell is denied.
6686 Write access to the cell is denied.
6687 Members belong to different hierarchies in the %{func/} function.
6688 The %{func/} function expects a set of members for the %d{arg/} argument. A set of tuples with more than one hierarchy was passed.
6689 Two tuples specified in the %{func/} function have different dimensionality.
6690 The %{strHierName/} drilldown hierarchy cannot be found in the set of tuples specified for drilldown.
6691 The specified drill hierarchy %{strHierName/} cannot be found in the drill set.
6692 DrillDownMember function doesn't support recursive drilldown when second set hierarchy is different from the hierarchy parameter.
6693 An MDX statement was expected. An MDX expression or a (possibly empty) collection of custom rollup properties was specified in the query.
6694 The ALL option was expected for the third argument of the Intersect function. An expression was passed.
6695 An MDX expression was expected while a full statement was specified.
6696 Two sets specified in the %{func/} function have different dimensionality.
6697 By default, a dimension of type time was expected. No such dimension was found in the cube.
6698 The member and level in a date conversion function must belong to the same hierarchy.
6699 The MDX function cannot be applied because an argument expression returned a null member.
6700 By default, a month level was expected. No such level was found in the cube.
6701 By default, a quarter level was expected. No such level was found in the cube.
6702 By default, a week level was expected. No such level was found in the cube.
6703 By default, a year level was expected. No such level was found in the cube.
6704 The second argument passed to the Hierarchize function should be set to POST.
6705 The third argument passed to the Order function should be set to either ASC, BASC, DESC, or BDESC.
6706 Cannot process an empty text string as a query.
6707 The functions, AVG, SUM, MIN, and MAX, do not work if an expression passed as an argument evaluates to a string.
6708 An ordinal has not been specified for an axis.
6709 No appropriate overload function was found for the stored procedure. The parameters are incorrect.
6710 The Dimension function expects a dimension, hierarchy, level, or member expression as an argument.
6711 The Hierarchy function expects a hierarchy, level, or member expression as an argument.
6712 Default member must be defined on the hierarchy, '%{str/}' is not an hierarchy
6713 The slicer axis cannot be referenced.
6714 The %{num/} axis cannot be referenced in the query.
6715 The hierarchy ordinal is out of range in the %{func/} function.
6716 %{name/} was referenced before it was evaluated.
6717 The default member was defined for the lower level, but not for the upper level.
6718 The specified default member '%{membername/}' must be from the '%{hiername/}' hierarchy.
6719 The %{name/} calculated member cannot be used as a parent of another calculated member.
6720 The cell range provided is out of the acceptable range.
6721 A collection of custom member properties was expected. An MDX expression or statement was specified.
6723 No cube specified. A cube must be specified for this command to work.
6724 The END SCOPE statement does not match the opening SCOPE statement.
6725 An MDX Statement was expected. An MDX expression was specified.
6726 The THIS statement cannot be used in an expression.
6727 The Set_Count argument of the NonEmptyCrossJoin function is either negative or larger than the number of sets provided.
6728 The third argument passed to the ToggleDrillState function should be RECURSIVE.
6729 The Item function expects either a tuple or an array of members as a parameter. It cannot take both.
6730 The Item function expects an array of members as a parameter that match the dimensionality of the object on which the function is called.
6731 The cube contains a semiadditive measure %{name/}. The time dimension in the relevant measure group contains more than a single attribute; only one is supported.
6732 The %{func/} function expects an array expression for the %d{arg/} argument. A level expression was used.
6733 The %{func/} function expects an array expression for the %d{arg/} argument. A hierarchy expression was used.
6734 The %{func/} function expects an array expression for the %d{arg/} argument. A member expression was used.
6735 The %{func/} function expects an array expression for the %d{arg/} argument. A tuple expression was used.
6736 The %{func/} function expects an array expression for the %d{arg/} argument. A set expression was used.
6737 The %{func/} function expects an array expression for the %d{arg/} argument. A string or numeric expression was used.
6738 The %{func/} function expects an array expression for the %d{arg/} argument. A dimension expression was used.
6739 The %{func/} function expects a dimension expression for the %d{arg/} argument. An array expression was used.
6740 The %{func/} function expects a hierarchy expression for the %d{arg/} argument. An array expression was used.
6741 The %{func/} function expects a string or numeric expression for the %d{arg/} argument. An array expression was used.
6742 The %{func/} function expects a set expression for the %d{arg/} argument. An array expression was used.
6743 The %{func/} function expects a tuple expression for the %d{arg/} argument. An array expression was used.
6744 The %{func/} function expects a member expression for the %d{arg/} argument. An array expression was used.
6745 The %{func/} function expects a level expression for the %d{arg/} argument. An array expression was used.
6746 All elements of the array must be of the same type.
6747 The %{func/} user-defined function returns an array, which is not supported.
6748 The number of parameters specified does not match any available overload of the %{func/} function.
6750 Managed assemblies cannot be loaded. The library, msmgdsrv.dll, was not loaded or a version mismatch occurred.
6751 An MDX expression was expected. An empty expression was specified.
6752 The '%{dimname/}' name specified in the CALCULATE USING statement is not a valid dimension name.
6753 The '%{dimname/}' dimension was specified more than once in the CALCULATE USING statement.
6754 Current session is no longer valid due to structural changes in the database.
6755 The calculation pass number cannot be zero.
6756 The pass depth of the calculation is not valid.
6757 The '%{template/}' string is not a valid expression for the Pattern argument of the VisualTotals function. Use the asterisk (*) character.
6758 The %{type/} type cannot be converted to an MDX type.
6759 A null tuple cannot be used in a WHERE clause.
6760 The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples.
6761 The MDX script for the cube contains an error.
6762 The definition of the %{name/} set contains a circular reference.
6763 The argument value passed for Count was negative. Negative values are not supported for Count.
6764 The CURRENT function cannot be invoked in this context because the '%{name/}' set is not in the scope.
6765 The %{func/} function can be called only on a named set.
6766 The SOLVE_ORDER property must be a constant.
6767 The VISIBLE property must be a constant.
6768 The DISABLED property must be a constant.
6769 The CALCULATION_PASS_NUMBER and CALCULATION_PASS_DEPTH properties must be constants.
6770 The request transaction was not validated. The server is terminating the request unsuccessfully.
6771 A subcube definition cannot resolve to an empty subcube.
6772 Sets with members from multiple levels of a non-parent-child hierarchy cannot be specified as part of a subcube definition. Use the Descendants function instead.
6773 Sets with multiple members from a level in an unnatural hierarchy cannot be specified as part of a subcube definition. Use the Children, Descendants, Members, or AllMembers function instead.
6774 Sets with multiple hierarchies cannot be specified as part of a subcube definition. Use the Crossjoin function or the Crossjoin operator (*) instead.
6775 User specified error.
6776 %{usernote/}
6777 The set must have a single hierarchy to be used with the complement operator.
6778 Set used with the complement operator must have all members from the same level.
6779 MDX queries must contain exactly three axes when the BlsContentType property is set to 'SpreadsheetXml'.
6780 MDX queries cannot have a WHERE clause when the 'BlsContentType' property is set to 'SpreadsheetXml'.
6781 MDX queries cannot have a NON EMPTY clause when the BlsContentType property is set to 'SpreadsheetXml'.
6782 Drillthrough failed because the coordinate identified by the SELECT clause is out of range.
6783 Drillthrough failed because the SELECT clause returned more than one cell.
6784 You cannot drillthrough if the cell in a select clause is a calculated cell.
6785 Drillthrough cannot be performed with a condition on a level if that level does not have an attribute hierarchy.
6786 UnknownMember function cannot be called in this context.
6787 There is a type mismatch for the '%{func/}' function.
6788 There is a Type mismatch for the '%{func/}' operator.
6789 There is a type mismatch for the left argument of the '%{func/}' operator.
6790 There is a type mismatch for the (right hand side) argument of the '%{func/}' operator.
6791 The %{func/} function expects a set expression.
6792 The '%{func/}' function expects a Key Performance Indicator (KPI) name as an argument.
6793 The '%{kpi/}' argument passed to the '%{func/}' function must be a Key Performance Indicator (KPI) name.
6794 Stored procedures with different impersonation modes can not be called from each other.
6795 Code-based security in managed code was not set because of the following error: %1[%{exception/}%]%[;%{exceptioninner/}%].
6796 Prepare is not safe during execution of the %{sproc/} stored procedure.
6797 The '%{name/}' measure name is not valid. It should be of the form [cube name].[measure name]
6798 The '%{name/}' dimension name is not valid. It should be of the form [cube name].[dimension name]
6799 CREATE GLOBAL CUBE statement. %{text/}
6800 An arbitrary shape of the sets is not allowed in the current context.
6801 The '%{op/}' operator cannot be used with sets.
6802 The GROUPING level, '%{name/}', cannot appear last in the hierarchy definition.
6803 The Axis function was indirectly referenced from the context of a statement other than SELECT. Evaluation of expressions involving this function succeed only when indirectly triggered by a SELECT statement.
6804 The '%{func/}' function expects a member or set of a single hierarchy for the %d{arg/} argument. A set of multiple hierarchies was passed.
6805 Database administrator permissions are required to execute either the Set Calculations Contingent or Set Calculations NonContingent command.
6806 Set Calculations NonContingent cannot be called after Set Calculations Contingent.
6807 The %{func/} function cannot be executed in a NonContingent state.
6808 The %{arg/} argument to the %{func/} function must be a flag.
6809 The %d{arg/} argument to the '%{func/}' function contains a flag that is not supported.
6810 The restrictions imposed by the CONSTRAINED flag in the %{func/} function were violated.
6811 The MDX function %{func/} failed because the coordinate for the '%{attr/}' attribute contains a set.
6812 The mining model name should be a string.
6813 The mining model name is not specified.
6814 The specified mining model does not exist.
6815 The specified mining model has not been processed.
6816 The specified mining model is not part of an OLAP mining structure.
6817 The context cube is not the source of the OLAP mining structure containing the specified mining model.
6818 The expression parameter should be a string that evaluates to a numeric value.
6819 The numeric expression is not specified.
6820 The following numeric expression cannot be evaluated: %{detailed_error_text/}
6821 The numeric expression was evaluated; but it did not return a result.
6822 The expression is not valid.
6823 The function failed because of the following error: %1[%{exception/}%]%[;%{exceptioninner/}%].
6824 The '%{name/}' named set cannot be created because a set with the same name already exists.
6825 The '%{name/}' cell calculation cannot be created because a cell calculation with the same name already exists.
6826 The '%{name/}' action cannot be created because an action with the same name already exists.
6827 The %{name/} calculated member does not exist.
6828 The %{name/} named set does not exist.
6829 The %{name/} cell calculation does not exist.
6830 The %{name/} action does not exist.
6831 The method can be executed only in the scope of the cube. The request does not have the current cube specified.
6832 The DROP CUBE command is only supported on session cubes. '%{name/}' is not a session cube.
6833 The value cannot be computed.
6834 Multiple statements are not allowed.
6835 The Extract function was called with hierarchy '%{hier/}' that does not exist in the set.
6836 The hierarchy '%{hier/}' was passed more than once to the Extract function.
6837 Calculated members are not supported on fact dimensions. The '%{name/}' dimension is a fact dimension.
6838 Range cannot include calculated members when the BlsContentType property is set to 'SpreadsheetXml'.
6839 Only tabular results are supported when the BlsContentType property is set to 'SpreadsheetXml'.
6840 The query must contain exactly three axes when the property 'BlsContentType' is set to 'SpreadsheetXml'.
6841 Only the .Members and range sets are accepted when the BlsContentType property is set to 'SpreadsheetXml'.
6842 Unable to execute BLS request because the BLS session is not initialized.
6843 The DROP SUBCUBE command failed because no subcubes are associated with this session.
6844 The set in the WHERE clause cannot contain multiple measures.
6845 A set has been encountered that cannot contain calculated members.
6846 Cell updates are not supported for sets in WHERE clause.
6847 It is not safe to call a user-defined function from interface '%{intf/}'.
6848 The time dimension in the relevant measure group is parent-child type and there is a semiadditive measure '%{name/}' in the cube. This configuration is not supported.
6849 Query optimizer generated too many subcubes in the query plan.
6850 Leaves function for attributes with mixed granularity in different measure groups is not supported.
6851 Distinct count measure is not supported for local cubes.
6852 The attribute %{strAttr/} does not have any members.
6853 The VisualTotals function may only be called with a single-hierarchy set parameter.
6854 Subselects and subcubes cannot restrict the space using calculated members.
6855 Subselects and subcubes cannot restrict the space using the HAVING clause.
6856 Subselects and subcubes cannot define new calculations using the WITH clause.
6857 Subselects and subcubes cannot have cell properties.
6858 Subselects and subcubes cannot use the NON EMPTY clause.
6859 Subselects and subcubes cannot be queried in flattened format.
6860 Subselects and subcubes cannot have prediction join input.
6861 Subselects and subcubes cannot have model prediction join.
6862 Subselects and subcubes cannot have GROUP BY clause.
6863 Subselects and subcubes cannot have ORDER BY clause.
6864 Subselects and subcubes cannot query model content.
6865 Subselects and subcubes cannot query model sample cases.
6866 Subselects and subcubes cannot query model cases.
6867 Subselects and subcubes cannot query model xml.
6868 Subselects and subcubes cannot query model dimension content.
6869 No dimensions specified for the measure '%{measure/}'
6870 Aggregation function %{aggfunc/} specified for mapping account type %{accounttype/} is not supported for ByAccount semiadditive measure.
6871 Subselects only support the COLUMNS axis.
6872 Arbitrary shape is not allowed when slicing on many-to-many dimensions.
6873 The %{func/} function expects a stored procedure for the argument.
6874 Cannot aggregate distinct count measure using custom expression.
6875 Semiadditive measure %{msr/} requires Time dimension in the measure group.
6877 Semiadditive measure %{msr/} requires Account attribute in the Account dimension. If Account has parent-child hierarchy, then Account attribute must be Parent attribute.
6878 Semiadditive measure %{msr/} requires Account Type attribute in the Account dimension to be present and related to Account attribute.
6879 The default members for the dimension '%{dimName/}' do not exist with each other.
6880 Unable to obtain the current member because a non-aggregatable attribute has a calculated member coordinate from a different hiearchy.
6881 Clr Assembly must have main file specified.
6882 The MDX function %{func/} failed because current coordinate is empty.
6883 Clr assemblies are not supported in local cubes.
6884 The drillthrough operation cannot be performed.
6885 The drillthrough operation cannot be performed because a writeback operation is pending.
6886 The drillthrough operation cannot be performed because cell security does not allow access to the source data.
6887 The DistinctCount function can only be used on a calculated measure (and not a member).
6888 Unable to drop the object '%{strObjectName/}', because it is referenced by at least one another object.
6889 You may not use a calculated measure or an aggregation function for the column '%{measure/}' in the RETURN clause of the drillthrough query.
6890 non_empty_behavior property can not contain calculated member.
6891 The %{name/} measure group was not found.
6892 Arbitrary shape is not allowed when its elements cross a reference dimension.
6893 The parameter for UrlEscapeFragment should be a string.
6894 Specified name could not be resolved.
6895 Specified calculated member name is invalid.
6896 Multiple hierarchy set was specified in DROP VISUALTOTALS.
6897 %{name/} hierarchy is parent/child hierarchy. Grouping of parent/child hierarchies is not suported.
6898 The group '%{name/}' does not have a corresponding level.
6899 The CREATE CUBE statement is not valid because none of the selected dimensions belongs to the measure group of the selected measure '%{name/}'
6900 %{name/} dimension is a linked dimension. Grouping on linked dimensions is not suported.
6901 %{name/} dimension is a ROLAP dimension. Grouping on ROLAP dimensions is not suported.
6902 %{name/} attribute is discretized. Grouping of discretized attributes is not suported.
6903 %{name/} is a data mining dimension, it can't be added to local cube.
6904 AggregateFunction of measure %{name/} is FirstChild/LastChild/FirstNonEmpty/LastNonEmpty/AverageOfChildren and Time dimension is not included in full in the local cube.
6905 AggregateFunction of measure %{name/}is ByAccount and Account dimension is not included in full in the local cube.
6906 Many-to-many dimension %{name/} is included in the local cube, but none of the measures from its intermediate measure group %{mg_name/} is.
6907 Many-to-many dimension %{name/} is included in the local cube, but there are dimensions common to its measure group %{mg_name/} and to its intermediate measure group %{img_name/}, which are not included in full.
6908 Expression cannot be resolved in the context of an arbitrary shape.
6909 Database administrator or server administrator permissions are required to execute SystemGetLogicalDrives command.
7400 The CATALOGS schema rowset identifies physical attributes that are associated with databases.
7401 The TABLES schema rowset identifies the tables in the database that a specified user can access.
7402 The TABLES_INFO schema rowset identifies the tables in the database that a specified user can access.
7403 The COLUMNS schema rowset identifies the columns of tables in the catalog that a specified user can access.
7404 The PROVIDER_TYPES schema rowset identifies the base data types that are supported.
7405 The CUBES schema rowset identifies the cubes in the database that a specified user can access.
7406 The DIMENSIONS schema rowset identifies the dimensions in the database that a specified user can access.
7407 The HIERARCHIES schema rowset identifies the hierarchies in the database that specified user can access.
7408 The LEVELS schema rowset identifies the levels in the database that a specifed user can access.
7409 The MEASURES schema rowset identifies the measures in the database that a specifed user can access.
7410 The PROPERTIES schema rowset identifies the properties in the database that a given user can access.
7411 The MEMBERS schema rowset identifies the members in the database that a given user can access.
7412 The FUNCTIONS schema rowset identifies the functions that are supported by the data provider.
7413 The ACTIONS schema rowset identifies the actions that are supported by the data provider.
7414 The SETS schema rowset identifies the calculated sets that are supported by the data provider.
7415 The MINING_SERVICES schema rowset identifies available data mining algorithms that are provided by the data providers.
7416 The MINING_SERVICE_PARAMETERS schema rowset identifies the parameters that can be used to create models for each type of algorithm.
7417 The MINING_FUNCTIONS schema rowset identifies the functions that can be used to query models for each type of algorithm.
7418 The MINING_MODEL_CONTENT schema rowset describes the patterns that were discovered when the mining models were processed.
7419 The MINING_MODEL_XML schema rowset contains, in an XML format, the patterns that were discovered when the mining models were processed.
7420 The MINING_MODELS schema rowset identifies the available models for the data provider.
7421 The MINING_COLUMNS schema rowset identifies the columns of the mining models for the data provider.
7422 The DISCOVER_DATASOURCES schema rowset contains a list of published data sources.
7423 The DISCOVER_PROPERTIES schema rowset returns information about the properties supported by an XML for Analysis provider.
7424 The DISCOVER_SCHEMA_ROWSETS schema rowset returns a list of all RequestTypes enumeration values that are supported by the provider.
7425 The DISCOVER_ENUMERATORS schema rowset returns the supported enumerators for a provider, including data types and values.
7426 The DISCOVER_KEYWORDS schema rowset lists keywords that are reserved by a provider.
7427 The DISCOVER_LITERALS schema rowset returns the information about supported literals for a provider, including data types and values.
7428 The client components on this workstation must be upgraded before a connection can be established to this instance of Analysis Services.
8200 The '%{strQName/}' read-only element at line %d{iLine/}, column %d{iCol/} (namespace %{strNSURI/}) under %1[%{strName/}%]%[/%{strName/}%] was ignored.
8601 The query cannot be executed. A catalog must be set for this session.
8609 The '%{txnid/}' transaction ID cannot be found. Either the transaction does not exist or it has already completed.
8610 The '%{sessionid/}' session ID cannot be found. Either the session does not exist or it has already expired.
8611 The restriction value provided by the consumer either does not match other restrictions or refers to an unknown object.
8612 The commit or rollback request cannot be completed because there is no active transaction in this session.
8613 The required RequestType element was missing from a Discover request.
8614 The restriction, %{strName/}, is not recognized by the server.
8615 The result, %{resultid/}, cannot be found for this session. Either the result has not been created by the KeepResult header, or it has been cleared
8616 Invalid ObjectExpansion '%{objectExpansion/}' specified for DISCOVER_XML_METADATA. Allowed values are: ExpandFull, ExpandObject, ReferenceOnly and ObjectProperties.
8632 The restriction value provided by the consumer is of a type that is not valid.
8633 The '%{strReqType/}' request type was not recognized by the server.
8634 The %{strName/} property is read only and cannot be assigned a value.
8635 The '%{value/}' value of the '%{property/}' XML for Analysis property is not valid.
8636 The %{partName/} partition must be processed before an incremental update is performed.
8637 The %{part/} partition is not a MOLAP partition and does not support incremental updates.
8638 An error occurred while data was being merged into the %{partName/} partition. Source partitions must be different from the destination partition.
8639 An error occurred while data was being merged into the %{partName/} partition. Partitions that are to be merged must belong to the same measure group.
8640 An error occurred while data was being merged into the %{partName/} partition. Partitions that are to be merged must use the same storage mode.
8641 An error occurred while data was being merged into the %{partName/} partition. Partitions that are to be merged must be of the same type.
8642 The object specified must be a partition.
8643 An error occurred while partitions were being merged. The %{partName/} partition uses a storage mode that is not valid.
8644 The server session cannot be started.
8645 The operation is not supported by the redirector service.
8646 The %{strName/} restriction is required but is missing from the request.
8647 A session transaction cannot be nested inside an existing transaction. Session objects cannot be created inside a non-session transaction.
8648 A session transaction is already in progress, but a non-session write operation was initiated. After creating a session object, the session object must be dropped before attempting a server write operation to non-session objects.
8649 The XML for Analysis request timed out before it was completed.
8650 An error occurred while partitions were being merged. The %{partName/} partition is remote.
8651 An error occurred while partitions were being merged. The %{partName/} partition is not processed.
8652 No source partitions were specified for merging.
8653 The %{strName/} partition specified for an incremental update is remote.
8654 The ImpactAnalysis property can only be set when the ExecutionMode is Execute.
8655 Result data cannot be requested when the ExecutionMode is Prepare; only Schema/Metadata may be requested.
8656 The statement cannot be prepared.
8657 The session has a stored result. This statement must either use the stored result or clear it.
8658 The results of the current statement cannot be stored on the server because the current session already has a stored result.
8659 The results of the current statement cannot be stored on the server because the associated session is either unspecified or not valid.
8660 The ResultId specified in the Result header is not valid for the current session.
8661 Results cannot be stored on the server when the ExecutionMode is Prepare.
8662 An existing stored result cannot be used when the ExecutionMode is Prepare.
8663 To store a result on the server, an MDX statement must be executed.
8664 To use a result stored on the server, you must execute either the original statement or an empty statement.
8665 A valid stored result does not exist on the server for the requested ResultId.
8666 The input statement does not match the original statement used to produce the stored result for the requested ResultId.
8667 The input query is not in the language specified in the Dialect property for this request.
8668 The %{strName/} property was not recognized.
8669 Can not use port 0 for both Ipv6 and Ipv4.
8670 A session object cannot be created with the AllowOverwrite flag enabled.
8671 The %{strName/} property is not overwritable and cannot be assigned a new value.
8672 The CurrentCatalog XML/A property was not specified.
8673 A required header wasn't recognized and can't be honored.
8674 Ill-formed base64-encoded data was encountered.
8675 Non-empty value is required for the '%{strName/}' restriction from the request.
8676 The value of the '%{property/}' XML for Analysis property could not be converted into the expected data type.
9010 The MSOLAP ISAPI extension was started successfully.
9011 The MSOLAP ISAPI extension was stopped.
9401 The connection has been closed by the remote server.
9402 The connection timeout was exceeded.
9403 The '%{strHostname/}' host name cannot be resolved: %{External/}
9404 The '%{strURL/}' URL cannot be found.
9405 Either a connection cannot be made to the %{strHostname/} server, or Analysis Services is not running on the computer specified.
9406 The connection was lost: %{External/}
9407 The physical TCP/IP connection failed: %{External/}
9408 The peer prematurely closed the connection.
9409 An error was encountered in the transport layer.
9412 The MSOLAP ISAPI extension failed to start.
9413 The MSOLAP ISAPI extension failed to read the configuration file.
9414 The HTTP server returned the following error: %{strValue/}.
9415 The response returned from the HTTP server is not valid.
9416 An error occurred while using the automatically-detected HTTP proxy information: %{External/}
9417 Server failed to start listening on any network port.
9418 No network transports available.
9419 Unexpected type or format of response from remote host was encountered.
10201 The end of the input was reached.
10202 The syntax for '%{strToken/}' is incorrect.
10203 The syntax for the Process command is incorrect. The Bindings keyword cannot appear under the Process command if the command is a part of a Batch command. Specify Bindings under a Batch command.
10204 The query contains the %{strParam/} parameter, which is not declared.
10205 The following syntax error occurred during parsing: %{strVP/}.
10206 The syntax to create and insert into local or session cubes is not supported.
10207 The syntax for the Process command is incorrect. If the Process command is a part of a Batch command, the ErrorConfiguration keyword may not appear under the Process command. Specify the ErrorConfiguration keyword under the Batch command.
10208 The %{strParam/} parameter could not be resolved because it was referenced in an inner subexpression.
10209 The end of data parameter for the pipeline request has an incorrect data type.
10210 Pipeline and non-pipeline rowsets cannot exist in the same request.
10211 An error occurred during pipeline processing.
10212 A new request was received after the pipeline processing operation had completed.
10213 The '%{strProperty/}' property cannot be specified more than once in the query.
10214 The script contains the statement, which is not allowed.
10215 '%{strType/}' is not a recognized action type.
10216 The statement dialect could not be resolved due to ambiguity.
10217 The syntax for the ImpersonationInfo object is incorrect. If the ImpersonateAccount value is used for ImpersonationInfo, then the Account property cannot be empty.
10218 The syntax for the ImpersonationInfo object is incorrect. The value of the ImpersonationMode property (%{strImpMode/}) is not supported for data sources.
10219 The subcube name is different from the cube name.
10220 The request property Dialect is incorrect. Only following values are valid: MDX, DMX, DM, SQL.
10221 Options are not allowed in the subselect.
10222 Recursive cube name specification is not allowed.
10223 Only one statement was expected.
11002 Unrecognized XSD type of '%{strXSIType/}' found on the element, %{strQName/}, at line %d{iLine/}, column %d{iCol/} (namespace %{strNSURI/}) under %1[%{strName/}%]%[/%{strName/}%].
11003 The '%{strQName/}' element at line %d{iLine/}, column %d{iCol/} (namespace '%{strNSURI/}') cannot appear under %1[%{strName/}%]%[/%{strName/}%] because the parent already contains a child element, '%{strFirstChild/}'.
11004 The '%{strQName/}' element at line %d{iLine/}, column %d{iCol/} ('%{strNSURI/}' namespace) appears more than once under %1[%{strName/}%]%[/%{strName/}%].
11005 The '%{strRequired/}' required element is missing under %1[%{strName/}%]%[/%{strName/}%]/%{strQName/} at line %d{iLine/}, column %d{iCol/} (namespace '%{strNSURI/}').
11006 XML parsing failed at line %d{iLine/}, column %d{iCol/}: %{strMessage/}.
11007 The %{strQName/} element at line %d{iLine/}, column %d{iCol/} (namespace %{strNSURI/}) cannot appear under %1[%{strName/}%]%[/%{strName/}%].
11008 %{strEnum/} is not a valid value for this element.
11009 '%{strEnum/}' is not a valid Boolean value. Only true, false, 1, or 0 are allowed for the '%{strQName/}' element, at line %d{iLine/}, column %d{iCol/} (namespace '%{strNSURI/}') under %1[%{strName/}%]%[/%{strName/}%]).
11010 A required child element is missing under %1[%{strName/}%]%[/%{strName/}%]/%{strQName/} at line %d{iLine/}, column %d{iCol/} (namespace '%{strNSURI/}'). One of %1[%{strChild/}%]%[, %{strChild/}%] was expected.
11011 The %{strQName/} element at line %d{iLine/}, column %d{iCol/} (namespace %{strNSURI/}) is out of order under %1[%{strName/}%]%[/%{strName/}%].
11012 The %{strAttrQName/} attribute (namespace %{strAttrNSURI/}) of the %{strQName/} element at line %d{iLine/}, column %d{iCol/} (namespace %{strNSURI/}) cannot appear under %1[%{strName/}%]%[/%{strName/}%].
11013 The %{strText/} text node at line %d{iLine/}, column %d{iCol/} cannot appear inside the %{strQName/} element (namespace %{strNSURI/}) under %1[%{strName/}%]%[/%{strName/}%]. This element can only have text nodes containing white-space characters.
11014 The DOM parser failed to load and parse the stream. URL:'%{strURL/}' Reason: '%{strReason/}' Source:'%{strSource/}'. File position: %d{iFilePos/}. Line: %d{iFileLine/}.
11015 The value could not be converted to the XSD type, '%{strXSIType/}', specified on element %{strQName/} at line %d{iLine/}, column %d{iCol/} (namespace %{strNSURI/}) under %1[%{strName/}%]%[/%{strName/}%].
11016 The DOM parser failed to load and parse the file '%{strFileName/}'.
11017 The '%{string/}' string cannot be converted to the %{type/} type.
11018 Invalid SX data type '%{type/}'.
11019 No content expected on the XML node.
12201 ROLAP partition with the Name='%{name/}' Id='%{id/}' can not have aggregations built on top of server time dimensions. Aggregaion skipped.
12202 ROLAP partition with the Name='%{name/}' Id='%{id/}' can not have aggregations at the (all, all, ... ) level. Aggregaion skipped.
12203 MOLAP partition with the Name='%{name/}' Id='%{id/}' can not have aggregations built on top of ROLAP dimension except at the (all, all, ... ) level. Aggregaion skipped.
12401 OLE DB reported a null status for column %d{column/}, which is defined as not null.
12402 The size specified for a binding was too small, resulting in one or more column values being truncated.
12601 The %{cartfile/} cartridge does not specify a list of supported providers that use the mssqlcrt:provider XML element.
12602 The %{cartfile/} cartridge contains a provider name that is not valid in the mssqlcrt:provider element. Only a single XML text node can be used in this element.
12603 The cartridge generated a statement that is not valid because more than one text statement was generated, the statement was not the correct type, or more than one parameter list was generated. The generated statement that is not valid is: %{stmt/}.
12700 The number of bound parameters does not match the number of passed parameters.
12701 The %{param/} parameter is outside the valid range of parameters for this statement. Insufficient parameters were found for the statement.
12702 An attempt was made to access either an out or in/out parameter. These parameter types are not currently supported.
12703 The DBMS name and version information cannot be retrieved.
12704 No provider was specified for the data source.
12705 The following unsupported database data type was encountered: DBTYPE = %{dbtype/}.
12706 The following unsupported XML data type was encountered: %{xmltype/}.
12707 Column %d{column/} is too large for this instance of Analysis Services.
12708 An error occurred when an accessor for an OLE DB rowset was created.
12709 OLE DB was unable to convert a value to the data type requested for column %d{column/}.
12710 OLE DB reported an overflow of the data type for column %d{column/}.
12711 OLE DB reported a sign mismatch of the data type for column %d{column/}.
12712 OLE DB reported the '%{status/}' status, which is unknown, for column %d{column/}.
12713 Nested table keys in a SHAPE query must be sorted in the same order as the parent table. The nested query may be missing an ORDER BY clause.
12714 The data provider does not support preparing queries.
12715 The schema information for the prepared query could not be retrieved.
12716 Schema information cannot be obtained from a prepared data provider query that returns hierarchical results. Schema information can be obtained after the query has been executed.
12717 The %{rest/} restriction ordinal is out of bounds. Insufficient restrictions were found for the schema rowset.
12718 The '%{schema_identifier/}' schema identifier was not recognized by the data source.
12719 The connection string specified for a remote query cannot be parsed into a Provider and a Datasource.
12720 The read operation was cancelled due to an earlier error.
12721 The managed provider '%{provider/}' could not be instantiated.
12722 A NULL value was fetched for column %d{column/}. NULL values are not allowed in this column.
12723 The cartridge for the '%{datasource/}' data source does not support the insert/update operation.
12724 The following unsupported OLE DB 2.0 database data type was encountered: DBTYPE = %{dbtype/}.
13101 A query to the data source view failed because a table, column name, or ID was too large for an internal buffer.
13102 The data source view does not contain a definition for the '%{table/}' table or view. The Source property may not have been set.
13103 The data source view does not contain a definition for the '%{column/}' column in the '%{table/}' table or view.
13104 The data source view does not contain the name of the '%{column/}' column in the '%{table/}' table or view.
13105 The data source view does not contain the logical type of the '%{column/}' column in the '%{table/}' table or view.
13106 The data source view does not contain the data type of the '%{column/}' column in the '%{table/}' table or view.
13107 The XPath query, '%{xpath/}', returned an error when it was being performed on the data source view.
13108 An unexpected internal error has occurred (a non-existent relationship was queried in the data source view).
13109 More than one relationship was found with the same ID ('%{relid/}').
13110 The relationship, foreign key, or key identified by '%{relid/}' was not found in the data source view.
13111 The data source view for the data source is not valid. External error: %{exception/}.
13112 The following exception occurred while an operation was being performed on a data source view: %{exception/}.
13113 The following error occurred while a table was being created in a data source view: %{exception/}.
13114 The following error occurred while a table was being dropped from a data source view: %{exception/}.
13115 The following error occurred while a data source view was being serialized: %{exception/}.
13125 The following exception occurred while the Time Dimension Generator (Microsoft.AnalysisServices.TimeDimGenerator.dll) was being used: %{exception/}.
13126 The following exception occurred while the managed IDataReader interface was being used: %{exception/}.
13127 The following exception occurred while the managed IDbConnection interface was being used: %{exception/}.
13128 The following exception occurred while the managed IDbCommand interface was being used: %{exception/}.
13129 The Parameters property of the IDbCommand interface does not support the IList interface. External error: %{exception/}.
13200 A connection could not be made to the data source with the DataSourceID of '%{datasourceid/}', Name of '%{datasourcename/}'.
13201 The '%{tableid/}' table that is required for a join cannot be reached based on the relationships in the data source view.
13202 A loop was found in the data source view at the '%{tableid/}' table.
13203 The columns '%{key/}' and '%{fkey/}' do not match in a relationship in the data source view.
13204 An attempt was made to query an attribute key that is outside the bounds.
13205 An attempt was made to query an attribute translation that is outside the bounds.
13206 Internal error: The number of bindings and bindables being queried do not match.
13207 A parent binding (schema '%{parschema/}', table '%{partable/}') and a child binding (schema '%{childschema/}' table '%{childtable/}') were found to come from different tables. This is not a valid combination.
13208 The update operation failed because the data source view identifies the column (table '%{table/}', column '%{column/}') as read-only, calculated, or auto-increment.
13209 The managed DLL, '%{mgddll/}', was either not loaded or is not valid.
13210 The update operation is causing multiple values to be written to the '%{column/}' column.
13211 Traversal of the data source view is exceeding the maximum configured depth of %d{depth/}.
13212 The binding for the '%{column/}' column is not a ColumnBinding type.
13213 The '%{table/}' table contains a SQL expression and cannot be referenced by pipeline processing.
13214 Pipeline processing can only reference a single table in the data source view.
13215 The '%{table/}' table is based on a named query, and contains one or more computed columns. A table based on a named query cannot contain computed columns. If the computed columns are necessary, add them to the query expression.
13216 Only one-to-many relationships are supported for parent-child dimensions. The '%{table/}' table contains many-to-many relationships between parent and child columns.
13217 The ROLAP database cannot create an index on the view for the '%{schema/}' schema, '%{table/}' table. Verify that the requirements for indexed views are met.
13218 The '%{table/}' table has a many-to-many relationship to its parent table and cannot contain columns with data type Binary.
13219 The writeback operation cannot be performed because the cartridge for the data source does not support the LinkChildrenToParent functionality.
13220 The writeback operation cannot be performed because it would affect multiple tables.
13221 The writeback operation cannot be performed because it involves the '%{datasource/}' remote datasource.
13222 The writeback operation cannot be performed because too many conditions were specified for the parent member.
13223 The '%{datasource/}' remote data source was encountered, but the cartridge does not support remote queries or table aliases.
13224 Cannot create ROLAP aggregation because the cartridge for the '%{datasource/}' data source does not support indexed views.
13225 The query could not be generated because the same column (TableId='%{table/}', ColumnId='%{column/}') is being ordered more than once, but with different data types.
13226 The '%{datasource}' remote datasource cannot be found in the metadata.
13227 The '%{datasource}' remote datasource was encountered while processing a parent-child dimension and it cannot be used.
13228 The cartridge for the '%{datasource}' datasource does not support table-aliasing, but querying a parent-child dimension requires this capability.
13229 The '%{property/}' time dimension property does not have a type.
13230 The delete operation cannot be performed because the server has encountered more than one member in a parent-child dimension with the same key.
13231 The %{type/} type is not supported by Analysis Services.
13232 The database operation was cancelled because of an earlier failure.
13233 The '%{datasource/}' secondary data source is not a relational data source, or does not use an OLE DB provider.
13234 A connection could not be made to the data source specified in the query.
13235 The datasource '%{datasource/}' requires an isolation level of SnapshotIsolation which is not supported by the database provider.
13250 While a SQL trace was being read, the following notification error occurred: [status = %d{status/}].
13251 The following SQL Server notification operation failed: error code = %d{code/}, operation = %{operation/}.
13260 The '%{col1/}' column could not be found in the top-level clause of the SHAPE statement.
13261 The '%{col1/}' column in the top level clause of the SHAPE query was used twice in a RELATE clause.
13262 An APPEND clause in the SHAPE query has more than one column that references the same '%{col1/}' key column in the top level query.
13263 The '%{col1/}' column in the RELATES clause was not found in the results of the OPENROWSET query.
13264 The number of key columns in the APPEND clause number %d{iClause/} is not the same as the top-level APPEND clause of the SHAPE query.
13265 An unexpected result was returned while verifying whether indexed views are supported for Rolap aggregations.
13266 An invalid start date was specified in the Time Dimension Generator (Microsoft.AnalysisServices.TimeDimGenerator.dll).
13267 An invalid end date was specified in the Time Dimension Generator (Microsoft.AnalysisServices.TimeDimGenerator.dll).
13268 A value generated by the Time Dimension Generator (Microsoft.AnalysisServices.TimeDimGenerator.dll) was of an unexpected data type.
13269 An error occurred. Unable to convert between OLE Date type and System Date type.
13270 The connection timeout specified in the server configuration is too large.
13271 The general timeout specified in the server configuration is too large.
13272 The chapter rowsets referenced by the SHAPE operation appear to be unsorted.
13273 Out of line bindings cannot use the implicit datasource '.'. Use an explicit DataSource ID in the bindings specified for this operation.
13274 Current version of the data source object is being taken offline as part of some request.
13275 Proactive caching operation has been invalidated by other request.
13801 Microsoft OLE DB Provider for Analysis Services 2005
13802 The server returned the following warning: %u{HR/} (%{ErrorText/}).
14210 The server returned the following error: %u{HR/} (%{ErrorText/}).
14211 The data source or location is not valid. Provide a valid server to which to connect.
14212 Either the user does not have access to the %{strCatalog/} catalog, or the catalog does not exist.
14213 A valid instance named '%{instance/}' cannot be found on the '%{server/}' server.
14214 An error occurred in processing the results returned by the server.
14215 An error occurred while the OLE DB data conversion library (external component) was being initialized.
14216 An error occurred while the memory allocator from the COM library (external component) was being obtained.
14217 An error occurred while the COM extended error service (external component) was being initialized.
14218 An error occurred while loading the connection dialog box component for prompting.
14219 An error occurred while named instance information was being retrieved from the SQLBrowser service on the '%{server/}' server.
14220 An error occurred processing a request to open a local cube.
14221 An error occurred while sending a request to the local cube.
14222 An error occurred while closing a request made to the local cube.
14223 The Extended Properties property is set to a value that is not supported.
14224 The command state has changed and the Range Rowset cannot be retrieved.
14225 The query result changed on the server. Cell writeback cannot handle this change.
14226 The requested level of privacy cannot be supported for an HTTP connection.
14227 The Integrated Security property cannot be set if a username and password is supplied.
14228 The cell properties of the dataset changed after the writeback operation.
14229 Could not connect to the redirector. Ensure that the SQLBrowser service is running on the '%{server/}' server.
14951 The encryption key for the '%{strRef/}' database was changed.
14952 The configuration property updates were not persisted.
14953 The command cannot be cancelled because there is no command currently running on the session.
14977 The encryption key for the '%{strRef/}' database was not changed.
14978 The configuration file was recreated.
14979 The %{partition/} remote partition is defined as ROLAP or HOLAP but all ROLAP queries will be executed by master anyway.
15001 The %{typename/} with the ID of '%{id/}' already exists in the '%{parentname/}' %{parenttypename/}.
15002 The %{typename/} with the name of '%{name/}' already exists in the '%{parentname/}' %{parenttypename/}.
15003 The %{typename/} with the ID of '%{id/}' cannot be found in the '%{parentname/}' %{parenttypename/}.
15004 Either the %{typename/} with the ID of '%{id/}' does not exist in the %{parenttypename/} with the ID of '%{parentid/}', or the user does not have permissions to access the object.
15005 The object reference is not valid. It does not match the structure of the metadata class hierarchy.
15006 The %{typename/} named, %{name/}, already exists in the %{parentname/} %{parenttypename/}. It must be deleted in a separate transaction before creating this object
15007 The ALTER statement must be fully expanded because it will cause a structure change to the %{name/} %{typename/}.
15008 Server and server role objects cannot be created, deleted, or fully expanded.
15009 The transaction cannot be committed because one or more objects were invalidated during the transaction.
15010 The %{typename/} with the ID of '%{id/}' is not a valid object for processing.
15011 The '%{id/}' ID of the %{typename/} is not valid because this ID is a reserved word, contains one or more characters that are not valid: '%{invalidchars/}', or is longer than 100 characters.
15012 The process type specified for the %{name/} %{typename/} is not valid.
15013 The type of the parent reference cannot be added to the specified object definition.
15014 The object definition supplied for the ALTER statement is of a different type that the object reference to be altered.
15015 The object ID cannot be changed from '%{strID/}' to '%{strNewID/}' for the '%{name/}' %{typename/}. The object ID cannot be changed by an ALTER statement.
15016 The object ID is missing from the object definition of %{strName/}. When a CREATE statement has set the object overwrite option, the statement requires an object ID.
15017 The '%{filename/}' key error log file name of the '%{name/}' %{typename/} is not valid. The file name is either too long, or contains characters that are not valid or are reserved.
15018 The %{typename/} with the ID of '%{id/}', Name of '%{name/}' was invalidated by operations in the transaction.
15019 The name, '%{name/}', for the %{typename/} is not valid because this name is a reserved word, contains one or more ivalid characters (%{invalidchars/}), or is longer than 100 characters.
15020 The '%{masterdatasourceid/}' master data source of the '%{database/}' database does not exist.
15021 Impact analysis inside a pending transaction cannot support CREATE, DELETE, or ALTER commands.
15022 The data directory of the server does not exist and could not be created.
15023 The process type specified for the %{name/} %{typename/} is not valid since it is not processed.
15024 The '%{collation/}' collation of the '%{name/}' %{typename/} is not valid or is not supported by the server.
15025 The '%{id/}' ID for the %{typename/} is empty or not specified.
15026 The '%{name/}' name of the %{typename/} is empty or not specified.
15027 The %{name/} %{typename/} was invalidated by operations in the transaction. Before another operation can be performed on this object, the object must be altered .
15028 An error occurred when instantiating a metadata object from the file, '%{filename/}'.
15029 An error occurred when loading the %{name/} %{typename/}, from the file, '%{filename/}'.
15051 The '%{datasourceviewid/}' data source view of the '%{dimension/}' dimension does not correspond to an existing data source view in the database.
15052 The %{defaulthierarchy/} default hierarchy of the %{dimension/} dimension does not correspond to an existing hierarchy in the dimension.
15053 The %{dimension/} dimension has no attributes.
15054 The %{dimension/} dimension has a loop in the attribute relationship graph.
15055 The %{dimension/} dimension has either zero or multiple key attributes.
15056 The attribute hierarchy for the %{property/} attribute cannot be created because a hierarchy with the same ID or name already exists.
15057 Either an OLAP mining model corresponding to the '%{miningmodelid/}' source mining model ID of the '%{dimension/}' data mining dimension does not exist, or the user does not have access to the OLAP mining model.
15058 The %{dimension/} data mining dimension does not have a parent-child MiningContentNodes hierarchy.
15059 The key attribute of the %{dimension/} data mining dimension does not have the required, related attribute named ATTRIBUTE_NAME.
15060 The '%{dimension/}' dimension has no user-defined hierarchies or attribute hierarchies.
15061 The source dimension of the '%{dimension/}' linked dimension cannot be linked.
15062 The '%{dimension/}' dimension is linked, ROLAP, or proactive cached and cannot have out-of-line bindings.
15063 The source of the '%{dimension/}' dimension is either missing or is not valid.
15064 The '%{dimension/}' dimension has a cube dimension binding that is not valid.
15065 The %{dimension/} dimension has multiple parent attributes.
15066 The '%{dimension/}' dimension with the '%{miningmodel/}' source mining model cannot be processed. The algorithm for the source mining model does not support data mining dimensions.
15067 The '%{dimension/}' dimension is parent-child, and is either ROLAP or proactive cached. This combination of features is not supported.
15068 The '%{dimension/}' dimension contains an attribute with invalid atribute name: '%{attribute_name/}' is one of the reserved words.
15069 The '%{dimension/}' dimension contains a member property with invalid name: '%{memb_prop_name/}' is one of the reserved words.
15070 The invalid hierarchy level name was specified: hierarchy level name can not be (All).
15071 The invalid datasource name was specified: datasource name can not be (All).
15072 The invalid datasource Id was specified: datasource Id can not be (All).
15073 The source of the '%{detail/}' measure group is either missing or is not valid.
15101 The key columns of the %{property/} attribute are either missing or are not valid.
15102 The %{orderbypropertyid/} orderby attribute ID of the %{property/} attribute either does not exist or is not a member property.
15103 The '%{relatedpropertyid/}' member property ID in the '%{property/}' attribute does not correspond to an existing attribute in the dimension.
15104 The '%{property/}' attribute is not a key attribute, but is related to the '%{parentproperty/}' parent attribute.
15105 The key columns of the '%{parentproperty/}' parent attribute must have the same composition and data types as those of the '%{keyproperty/}' key attribute.
15106 The name column of the '%{property/}' attribute is either missing or has a data type other than string.
15107 The Usage property of the '%{property/}' attribute is set to Parent, but the RootMemberIf property is missing.
15108 The skipped levels column of the %{property/} attribute is not valid because either the attribute is not a parent attribute or the data type is not integer.
15109 The custom rollup column of the %{property/} attribute is not valid because the data type is not string.
15110 The custom rollup properties column of the %{property/} attribute is not valid because the data type is not string.
15111 The unary operator column of the %{property/} attribute is not valid because either the attribute is not a parent attribute or the data type is not string.
15112 One or more translations of the %{property/} attribute have a caption column that is not valid because the data type is not string.
15113 The source of the '%{property/}' attribute is either missing or is not valid.
15114 The %{property/} attribute is a user-defined grouping attribute, but the attribute's bindings to custom rollups, a unary operator, or skipped levels are not allowed.
15115 The '%{property/}' discretized attribute cannot have multiple keys.
15116 The discretization method specified for the '%{property/}' attribute is not valid because this attribute is bound to a non-numeric column.
15117 The '%{property/}' discretized attribute cannot have related attributes.
15118 The '%{property/}' attribute cannot be aggregated. This non-aggregatable attribute cannot be related to the '%{parentproperty/}' parent attribute.
15119 The %{property/} attribute cannot have translations because the attribute's Usage property is set to Parent.
15120 The '%{property/}' attribute cannot have member properties because the attribute's Usage property is set to Parent.
15121 The '%{property/}' attribute cannot be discretized because the attribute's Usage property is set to 'Parent'.
15122 The %{property/} attribute cannot have user-defined groups because the attribute's Usage property is set to Parent.
15123 The %{property/} key attribute does not have an attribute hierarchy enabled.
15124 The %{property/} parent attribute cannot be aggregated.
15125 Internal Error: The MemberValue column of the %{property/} attribute has an invalid binding.
15126 The %{collation/} collation of the key column of the %{property/} attribute is either not valid or is not supported by the server.
15127 The name column of the '%{property/}' attribute has '%{collation/}' collation. This collation is either not valid or is not supported by the server.
15128 The '%{property/}' attribute cannot have member properties because this attribute does not have an attribute hierarchy enabled.
15151 The '%{hierarchy/}' hierarchy has zero levels.
15152 The '%{hierarchy/}' hierarchy has two levels, '%{level1/}' and '%{level2/}', that have the same source attribute '%{sourceproperty/}'.
15153 The %{hierarchy/} hierarchy cannot have a parent-child level in addition to other levels.
15154 The grouping operation cannot be performed on the %{dimension/} dimension since it is a ROLAP dimension
15201 The '%{sourcepropertyid/}' source attribute ID of the '%{level/}' level does not correspond to an existing attribute in the dimension.
15202 The %{level/} level is an All level, but it is not the first level of the hierarchy.
15203 The '%{parentpropertyid/}' parent attribute ID, of the '%{level/}' level either does not exist in the dimension or is not a parent attribute.
15204 The attribute hierarchy for the '%{sourceproperty/}' source attribute, of the '%{level/}' %{typename/}, is disabled.
15205 The Usage property for the '%{sourceproperty/}' source attribute of the '%{level/}' level is set to Parent.
15206 The '%{sourceproperty/}' non-aggregatable source attribute cannot belong to the '%{level/}' level because this level is not the top level of the hierarchy.
15207 The '%{sourceproperty/}' source attribute of the '%{level/}' parent-child level is not a key attribute.
15208 Session cubes are not overwritable therefore they can not be created with AllowOverwrite.
15251 The '%{datasourceviewid/}' data source view ID of the '%{cube/}' cube does not correspond to an existing data source view in the database.
15252 The '%{defaultmeasure/}' default measure of the '%{cube/}' cube does not exist.
15253 The dimension with ID of '%{dimensionid/}', Name of '%{dimensionName/}' referenced by the '%{cube/}' cube, does not exist.
15254 The attribute with ID of '%{propertyid/}', Name '%{propertyname/}' of referenced by the '%{cubedimension/}' cube dimension, does not exist.
15255 The hierarchy with ID of '%{hierarchyid/}', Name of '%{hierarchyname/}' referenced by the '%{cubedimension/}' cube dimension, does not exist.
15256 The level with ID of '%{levelid/}', Name of '%{levelname/}' referenced by the '%{cubehierarchy/}' cube hierarchy does not exist.
15257 The '%{cube/}' cube has a measure with the ID of '%{measureid/}' in more than one measure group.
15258 The '%{cube/}' cube has a measure with the name of '%{measurename/}' in more than one measure group.
15259 The %{cube/} cube has no measure groups.
15260 The source of the %{cube/} cube is either missing or is not valid.
15261 The '%{datasourceid/}' data source ID of the '%{cube/}' cube does not correspond to an existing data source in the database.
15301 The detail dimension with ID of '%{dimensionid/}', Name of '%{dimensionname/}' referenced by the '%{detail/}' measure group does not exist.
15302 The attribute with ID of '%{propertyid/}', Name of '%{propertyname/}' referenced by the '%{detaildimension/}' measure group dimension does not exist.
15303 The key columns of the %{detailproperty/} measure group attribute do not match in either number or data types to the key columns of the source attribute.
15304 The hierarchy with ID of '%{hierarchyid/}', Name of '%{hierarchyname/}' referenced by the %{detaildimension/} measure group dimension does not exist.
15305 The measure group dimension with ID of '%{detaildimensionid/}', Name of '%{name/}' referenced by the '%{measure/}' measure either does not exist or does not contain exactly one granularity attribute.
15306 No dimension relationships exist within the '%{detail/}' measure group.
15307 The '%{detail/}' measure group has no measures.
15308 The data type of the '%{measure/}' measure is not valid because the data type of the measure is a string type.
15309 The '%{detail/}' measure group has more than one distinct count measure.
15310 The '%{detail/}' measure group is not dynamically linked, but it contains the '%{dimension/}' dynamically linked dimension.
15311 Cannot link the '%{detail/}' measure group to its source measure group.
15312 The '%{detail/}' measure group cannot have out-of-line bindings because this measure group is linked.
15313 The source of the %{detail/} measure group is either missing or is not valid.
15314 The source of the '%{measure/}' measure is either missing or is not valid.
15315 The '%{detail/}' measure group is linked, but this group contains a non-linked measure group dimension, named %'{dimension/}'. The '%{dimension/}' dimension must be an indirect, reference, or data mining dimension.
15316 The '%{detailproperty/}' granularity attribute in the '%{detaildimension/}' measure group dimension does not have an attribute hierarchy enabled.
15317 UnknownMember is not a valid NullProcessing value for the %{measure/} measure.
15318 .
15319 The '%{dimension/}' dimension in the '%{detail/}' measure group has either zero or multiple granularity attributes. Must have exactly one attribute.
15320 The %{detailproperty/} granularity attribute in the %{detaildimension/} measure group dimension is not valid because it is a parent attribute.
15321 The data type of the '%{measure/}' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.
15322 The measure expression of the %{measure/} measure is not of the form [measure1]*[measure2] or [measure1]/[measure2].
15323 The measure expression of the %{measure/} measure contains the [%{operand/}] operand , which could not be resolved.
15324 The '%{operand/}' right operand of the measure expression of the '%{measure/}' measure cannot belong to the same measure group.
15325 The '%{operand/}' operand of the measure expression of the '%{measure/}' measure cannot have a measure expression.
15326 The aggregation function of the '%{measure/}' measure must be sum, count, min, or max because the function has a measure expression.
15327 The aggregation function of the %{operand/} left operand of the measure expression of the %{measure/} measure must be sum, count, min, or max.
15328 The aggregation function of the %{operand/} right operand of the measure expression of the %{measure/} measure must be sum, count, min, max, or distinct count.
15329 The NullProcessing value of the '%{measure/}' measure must be Preserve because its '%{operand/}' measure expression operand is Preserve.
15330 The data type of the %{measure/} measure must be the same as the %{operand/} left operand of its measure expression.
15331 The '%{collation/}' collation of the source column for the '%{measure/}' measure is either not valid or is not supported by the server.
15332 The '%{mmdim/}' many-to-many dimension in the '%{detail/}' measure group requires that the granularity of the '%{commondim/}' dimension is lower than that of the '%{lookupdetail/}' measure group.
15333 The '%{granularitypropertyid/}' granularity attribute ID referenced by the '%{detaildimension/}' measure group dimension does not exist.
15334 The '%{intermediatedimensionid/}' intermediate dimension ID of the '%{detaildimension/}' measure group dimension does not exist.
15335 The '%{intermediategranularitypropertyid/};' intermediate granularity attribute ID of the '%{detaildimension/}' measure group dimension does not exist.
15336 The '%{granularityproperty/}' intermediate granularity attribute of the '%{detaildimension/}' measure group dimension does not have an attribute hierarchy enabled.
15337 The '%{intermediatedimension/}' intermediate dimension of the '%{detaildimension/}' measure group dimension cannot be a many-to-many, reference, or data mining dimension.
15338 The '%{mmdim/}' many-to-many dimension in the '%{detail/}' measure group must belong to the '%{lookupdetail/}' intermediate measure group and cannot form close loop.
15339 In the '%{detail/}' measure group, the '%{mmdim/}' many-to-many dimension references a missing lookup measure group with an ID of '%{indirectdetailid/}'.
15340 The object with ID of '%{id/}', Name of '%{name/}' is of type '%{typename/}' which does not support the requested operation.
15351 The %{datasourceid/} data source of the %{partition/} partition does not correspond to a existing data source in the database.
15352 The '%{dimensionid/}' dimension ID referenced by the '%{partition/}' partition does not exist.
15353 The '%{propertyid/}' attribute ID referenced by the '%{partitiondimension/}' partition dimension does not exist.
15354 The key columns of the %{partitionproperty/} partition attribute are either missing or are not valid.
15355 The '%{measureid/}' measure ID referenced by the '%{partition/}' partition does not exist.
15356 The %{dimension/} dimension referenced by the %{aggregation/} aggregation does not exist.
15357 The attribute with ID of '%{propertyid/}', Name of '%{propertyname/}' referenced by the %{aggregationdimension/} aggregation dimension does not exist.
15358 The attribute with ID of '%{propertyid/}', Name of '%{propertyname/}' in the %{aggregationdimension/} aggregation dimension is not valid because it is a parent attribute.
15359 The '%{dimension/}' dimension referenced by the '%{aggdesign/}' aggregation design does not exist.
15360 The '%{property/}' attribute referenced by the '%{aggdesigndimension/}' aggregation design dimension does not exist.
15361 The aggregation design with an ID of '%{aggdesignid/}', of the '%{partition/}' partition, does not correspond to an existing aggregation design in the measure group.
15362 The parent measure group of the '%{partition/}' partition is a linked measure group.
15363 The '%{remotedatasourceid/}' remote data source ID of the '%{partition/}' partition is not valid.
15364 The '%{partition/}' partition is either a MOLAP or HOLAP partition, yet contains no MOLAP dimensions.
15365 The %{partition/} partition is a remote partition, but the partition contains a ROLAP or proactive cached dimension named '%{dimension/}'.
15366 The %{partition/} partition is either a ROLAP or proactive cached partition, and cannot have out-of-line bindings.
15367 The source of the '%{partition/}' partition is either missing or is not valid.
15368 The '%{storagelocation/}' storage location of the %{partition/} partition does not exist, is too long, or contains characters that are not valid or are reserved.
15369 The storage mode of the %{partition/} write enabled partition must be ROLAP.
15370 The %{remotedatasource/} remote data source must have an explicit catalog in its connection string.
15371 The %{remotedatasource/} remote data source cannot point back to the same database.
15372 The %{remotedatasource/} remote data source points to a database that does not have a master data source.
15373 The '%{masterdatasource/}' master data source must have an explicit catalog in its connection string.
15374 The '%{masterdatasource/}' master data source cannot be self-referential.
15375 The '%{masterdatasource/}' master data source points to a database that cannot have a master data source.
15376 The '%{storagelocation/}' storage location of the '%{partition/}' partition cannot be located under the server data directory.
15377 The '%{storagelocation/}' folder (Location in Restore command) cannot be located under the server data directory.
15378 The write enabled '%{partition/}' partition must have table binding.
15379 The '%{measure/}' measure has invalid or missing source.
15380 The '%{detail/}' measure group is not allowed to be write-enabled if any measure aggregates other than sum.
15381 The '%{detail/}' measure group is not allowed to be write-enabled if any measure is bound to unsigned column.
15382 The '%{attrib/}' attribute with IsAggregatable=false must not have any relationship to '%{relattrib/}' attribute that has AttributeHierarchyEnabled=true.
15401 The '%{datasourceid/}' data source ID of the '%{datasourceview/}' data source view does not correspond to an existing data source in the database.
15404 The '%{measure/}' measure has a binding that is not valid.
15405 Problems were encountered when trying to read '%{fname/}' trace definition file. The file may be damaged.
15410 The discretized attribute with ID of '%{propertyId/}', Name of '%{propertyName/}'in the '%{dimension/}' dimension has a name column or a translation binding with a FormatString that is not valid. A FormatString must have the following format: FirstBucketFormat;MidBucketFormat
15411 The '%{property/}' discretized attribute in the '%{dimension/}' dimension has a name or translation binding that has an unknown specifier in the '%{segment/}' FormatString segment.
15412 The '%{strRef/}' dimension referenced by the '%{strObj/}' cube permission does not exist.
15413 The '%{strRef/}' dimension attribute referenced by the '%{strObj/}' dimension permission does not exist.
15414 The '%{strRef/}' dimension attribute referenced by the '%{strObj/}' dimension permission does not exist.
15415 The source cube for the OLAP mining model was not found.
15416 Either the source cube or the database dimension with ID of '%{dimensionId/}' for the '%{structure/}' OLAP mining structure was not found.
15417 The '%{measuregroup/}' source measure group for the '%{structure/}' OLAP mining structure was not found.
15418 The specified connection was not found.
15419 The specified session was not found.
15420 The '%{miningmodel/}' mining model has no columns.
15421 The '%{miningmodel/}' mining model must have at least one non-key column.
15422 Processing for the database will be disabled because an error occurred while loading the '%{strRef/}' database cryptography key. One possible reason for this error is that the service account has changed.
15423 Failed to encrypt or decrypt sensitive data in the '%{strRef/}' database because the encryption key is unavailable. One possible cause is an improper change to the service account.
15424 Failed to access the server master encryption key. One possible cause is an improper change to the service account.
15425 The '%{strRef/}' dimension referenced by the '%{strObj/}' cube permission has its Write permission set to Allowed, so no attribute permissions can Allowed/Denied Set specified.
15434 An error occurred while setting the value for the '%{id/}' configuration property.
15435 An error occurred while getting the value of the '%{id/}' configuration property.
15436 The attribute with ID of '%{propertyid/}', Name of '%{propertyname/}' referred to by the '%{aggregationdimension/}' aggregation dimension cannot be aggregated from the '%{granularityprop/}' granularity attribute of the measure group.
15437 The '%{property/}' attribute referred to by the '%{aggregationdimension/}' aggregation dimension of the '%{aggregation/}' aggregation is not browsable.
15438 The source of the '%{dimension/}' dimension does not obey the restrictions required for proactive caching.
15439 The '%{name/}' measure group cannot be created because a dimension with the same name already exists in the cube.
15440 The proactive caching object of the '%{dimension/}' ROLAP dimension does not have real-time settings.
15441 The '%{partition/}' ROLAP partition proactive caching object does not have real-time settings.
15442 The proactive caching object of the '%{partition/}' HOLAP partition does not have real-time settings.
15443 The proactive caching object of the '%{dimension/}' MOLAP dimension does not have a finite duration for the silence interval, silence override interval, or force rebuild interval.
15444 The '%{partition/}' MOLAP partition proactive caching object does not have a finite duration for silence interval, silence override interval, or force rebuild interval.
15445 The '%{partition/}' HOLAP partition proactive caching object does not have a finite silence interval.
15446 The '%{dimension/}' dimension has proactive caching enabled for incremental processing, but not all the tables required by the dimension have been specified.
15447 The '%{partition/}' partition has proactive caching enabled for incremental processing, but not all of the tables required by the partition have been specified.
15448 The '%{dimension/}' dimension has proactive caching enabled for incremental processing. This setting requires that the dimension be MOLAP; which it currently is not.
15449 The '%{partition/}' partition has proactive caching enabled for incremental processing. This setting requires that the partition be MOLAP, but the partition is not set to MOLAP.
15450 Background processing failed for the '%{name/}' %{typename/}.
15453 The '%{dimension/}' dimension has proactive caching enabled for the OnCacheComplete online mode. This setting requires that the dimension have an infinite latency, but the dimension currently does not have an infinite latency.
15454 The '%{partition/}' partition has proactive caching enabled for the OnCacheComplete online mode. This setting requires that the partition have an infinite latency, but the partition does not have an infinite latency.
15455 The '%{defmb/}' security default member from the '{%attribute}' attribute returns a result from a different hierarchy.
15456 The '%{dimension/}' dimension has proactive caching enabled for force rebuild. This setting requires that the dimension have an infinite latency, but the dimension does not have an infinite latency.
15457 The '%{partition/}' partition has proactive caching enabled for force rebuild. This setting requires that the partition have an infinite latency, but the partition does not have an infinite latency.
15458 The '%{action/}' action is a DrillThrough action that does not support the target type that has been provided.
15459 The file name of the assembly must have an extension.
15460 The source of the '%{structure/}' mining structure is either missing or is not valid.
15461 The '%{datasourceid/}' data source ID of the '%{structure/}' mining structure does not correspond to an existing data source in the database.
15462 The '%{structure/}' mining structure has a cube dimension binding that is not valid.
15463 The '%{structure/}' mining structure has a dimension binding that is not valid.
15464 The file name of the assembly is missing and must be provided.
15465 The system assembly cannot be modified by a user request.
15466 The extension specified for the '%{fname/}' trace file is not valid. The extension must be '.trc'.
15467 The '%{property/}' attribute must be included in all aggregations because this attribute is non-aggregatable. However, the '%{aggregationdimension/}' aggregation dimension does not include this property.
15468 The '%{dimension/}' dimension must be included in all aggregations because this dimension contains one or more non-aggregatable attributes. However, the '%{aggregation/}' aggregation does not include this property.
15469 The event Id=%d{EventId/} does not contain the column Id=%d{ColId/}. Please refer to product documentation for a list of available event columns.
15470 The %d{eventid/} event column was already specified for the %d{columnid/} event.
15471 The '%{objectname/}' object cannot be created as a session object. Session scope can only be used when creating dimensions, cubes, mining structures, or mining models.
15472 The '%{cube/}' cube cannot be created as a session object because the cube's '%{detail/}' measure group is not linked.
15473 The server failed to create the processing schedule, possibly due to concurrent metadata changes.
15474 The server failed to create the processing schedule due to an object dependency loop.
15475 The '%{datasourceid/}' datasource specified in the the '%{datasourceview/}' source DSV for the '%{dimension/}' data mining dimension is not valid. The datasource specified must point to the current database ('.').
15476 The dimension '%{dimension/}' has a discretized attribute and therefore writeback cannot be enabled for it.
15477 The '%{measure/}' measure has a source of type RowBinding. Therefore its aggregation type must be changed to Count or Sum.
15478 The '%{object/}' dimension has proactive caching enabled using SQL Notification and therefore its source cannot be a named query.
15479 The '%{object/}' partition has proactive caching enabled using SQL Notification. Therefore its source cannot be a named query.
15480 The '%{object/}' dimension has proactive caching enabled. Therefore its source cannot be a remote datasource.
15481 The '%{object/}' partition has proactive caching enabled. Therefore its source cannot be a remote datasource.
15482 The server failed to create the processing schedule due to concurrent metadata graph changes.
15483 The partition '%{partition/}' does not have a valid data source view.
15484 Member cannot be deleted because its data cannot be transferred to the unknown member.
15485 LOG file extension can be only .LOG.
15486 The property %{relatedpropertyname/}, which is related to key property %{property/}, can not have relationship type set to None
15487 The lock operation is supported only on database objects.
15488 The non-aggregatable attribute '%{attribute/}' in the '%{dimension/}' dimension, is referenced by the cube attribute '%{property/}' from cube dimension '%{dimension/}', which has aggregation usage Full.
15489 The partition with ID '%{partitionID/}' and name '%{partitionName/}' is a regular partition and cannot be altered to be a Writeback partition.
15490 The remote partition '%{partition/}' cannot have proactive caching enabled.
15491 The '%{detail/}' regular measure group cannot be created because it uses the '%{dimension/}' linked dimension, whose 'UnknownMember' property is set to 'None'. A regular measure group can only use a linked dimension whose 'Unknown Member' property is set to either 'Hidden' or 'Visible'.
15492 The '%{dimension/}' reference dimension specified in '%{detail/}' measuregroup of the '%{cube/}' cube is invalid because it is materialized and uses the server time dimension. A materialized reference dimension cannot have a server time dimension as its intermediate dimension.
15493 Both the '%{cubedimension2/}' and '%{cubedimension1/}' cube dimensions of the '%{cube/}' cube have a hierarchy named '%{cubehierarchy/}'. These dimensions cannot have a hierarchy with the same name because the HierarchyUniqueNameStyle property of both dimensions is set to ExcludeDimensionName.
15494 The '%{dimension/}' reference dimension specified in '%{detail/}' measuregroup of the '%{cube/}' cube is invalid because it is a server time dimension. A reference dimension cannot be a server time dimension.
15801 The '%{aggdesign/}' aggregation design object has zero estimated rows; no design aggregations can be designed.
15802 The %{attribute/} attribute of the %{dimension/} dimension has zero values. The server cannot design aggregations for this attribute.
15803 The '%{dimension/}' dimension has no attribute for the aggregation design. The server cannot design aggregations when this attribute is missing.
15804 The '%{dimension/}' dimension does not have data associated with the partition (it is of type many-to-many, data mining, or reference). The '%{attribute/}' attribute must be set to have aggregation usage of None or Default.
15805 The aggregation design operation is currently running for the '%{aggdesign/}' aggregation design object. Usage-based optimization cannot be applied at this stage.
15806 The '%{ubo/}' usage based optimization query is not valid. For the appropriate format, refer to the product documentation.
15807 The '%{dimension/}' dimension does not have data associated with the partition. The dimension is a many-to-many, data mining, or a reference dimension. The dimension must have the All member aggregation usage set to None or Default.
15808 The '%{attribute/}' attribute in the '%{dimension/}' dimension is non aggregatable and must be set to have an aggregation usage of Full or Default.
15809 Object specified in a client request is not an aggregation design object. Only aggregation design objects are allowed for this command.
16201 Specifies the approximate number of clusters to be built by the algorithm. If the approximate number of clusters cannot be built from the data, the algorithm builds as many clusters as possible. Setting the CLUSTER_COUNT parameter to 0 causes the algorithm to use heuristics to best determine the number of clusters to build. The default is 10.
16202 The clustering method the algorithm uses can be either: Scalable EM (1), Non-scalable EM (2), Scalable K-means (3), or Non-scalable K-means (4).
16203 This parameter specifies the minimum number of cases in each cluster.
16204 This parameter specifies the number of sample models constructed during the clustering process.
16205 Specifies the value used to determine when convergence is reached and the algorithm is finished building the model. Convergence is reached when the overall change in cluster probabilities is less than the ratio of the STOPPING_TOLERANCE divided by the size of the model.
16206 Specifies the number of cases that the algorithm uses on each pass if the CLUSTERING_METHOD parameter is set to one of the scalable clustering methods. Setting SAMPLE_SIZE to 0 will cause the entire dataset to be clustered in a single pass, which can cause memory and performance issues.
16207 Specifies the maximum number of input attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 specifies that there is not a maximum number of attributes.
16208 Specifies the maximum number of input attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 disables feature selection for input attributes.
16209 Specifies the maximum number of output attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 disables feature selection for output attributes.
16212 Inhibits the growth of the decision tree. Decreasing the value increases the likelihood of a split, while increasing the value decreases the likelihood. The default value is based on the number of attributes for a given model: The default is 0.5 if there is 1 to 9 attributes; the default is 0.9 if there are 10 to 99 attributes; and the default is 0.99 if there are 100 or more attributes.
16213 Specifies the minimum number of cases required to generate a split in the decision tree.
16214 Specifies the method used to calculate the split score. The available methods are: Entropy (1), Bayesian with K2 Prior (3), or Bayesian Dirichlet Equivalent with Uniform prior (4).
16215 Specifies the method used to split the node. The available methods are: Binary (1), Complete (2), or Both (3).
16220 Specifies the maximum number of input attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 disables feature selection for input attributes.
16221 Specifies the maximum number of output attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 disables feature selection for output attributes.
16222 Information not available for this release.
16223 Specifies the maximum number of attribute states that the algorithm supports. If the number of states that an attribute has is greater than the maximum number of states, the algorithm uses the attribute's most popular states and treats the remaining states as missing.
16230 Specifies the minimum number of cases that must contain the itemset before generating a rule. Setting this value to less than 1 specifies the minimum number of cases as a percentage of the total cases. Setting this value to a whole number greater than 1 specifies the minimum number of cases as the absolute number of cases that must contain the itemset. The algorithm may increase the value of this parameter if memory is limited.
16231 Specifies the maximum number of cases in which an itemset can have support. If this value is less than one, it represents a percentage of the total cases. Values greater than one represent the absolute number of cases that can contain the itemset.
16232 Specifies the minimum number of items allowed in an itemset.
16233 Specifies the maximum number of items allowed in an itemset. Setting this value to 0 specifies that there is no limit to the size of the itemset.
16234 Specifies the maximum number of itemsets to produce. If no number is specified, the algorithm generates all possible itemsets.
16235 Specifies the minimum probability that a rule is true. For example, setting this value to 0.5 specifies that no rule with less than 50% probability is generated.
16236 Specifies the importance threshold for association rules. Rules with importance less than this value are filtered out.
16237 Defines the number of items to be cached or optimized for prediction.
16240 Specifies the approximate number of clusters to be built by the algorithm. If the approximate number of clusters cannot be built from the data, the algorithm builds as many clusters as possible. Setting the CLUSTER_COUNT parameter to 0 causes the algorithm to use heuristics to best determine the number of clusters to build. The default is 10.
16241 Specifies the minimum number of cases in each cluster.
16250 Inhibits the growth of the decision tree. Decreasing this value increases the likelihood of a split, while increasing this value decreases the likelihood.
16251 Specifies the minimum number of time slices required to generate a split in each time series tree.
16252 Provides a hint to the algorithm as to the periodicity of the data. This parameter takes the format of {n [, n]}, where n is any positive number. The n within the brackets [] is optional and can be repeated as often as necessary.
16253 Specifies the maximum number of attribute states that the algorithm supports. If the number of states that an attribute has is greater than the maximum number of states, the algorithm uses the attribute's most popular states and treats the remaining states as missing.
16254 Microsoft Clustering
16255 The Microsoft Clustering algorithm uses iterative techniques to group records from a dataset into clusters containing similar characteristics. This is useful when you want to find general groupings in your data.
16256 Microsoft Decision Trees
16257 The Microsoft Decision Trees algorithm is a classification algorithm that works well for predictive modeling. The algorithm supports the prediction of both discrete and continuous attributes.
16258 Microsoft Naive Bayes
16259 The Microsoft Naive Bayes algorithm is a classification algorithm that is quick to build, and works well for predictive modeling. The algorithm supports only discrete or discretized attributes, and it considers all the input attributes to be independent, given the predictable attribute.
16260 Microsoft Association Rules
16261 The Microsoft Association Rules algorithm builds rules describing which items are most likely to be appear together in a transaction. The rules can be used to predict the presence of an item based on the presence of other items in a transaction.
16262 Microsoft Sequence Clustering
16263 The Microsoft Sequence Clustering algorithm is a combination of sequence analysis and clustering, which identifies clusters of similarly ordered events in a sequence. The clusters can be used to predict the likely ordering of events in a sequence based on known characteristics.
16264 Microsoft Time Series
16265 The Microsoft Time Series algorithm uses a linear regression decision tree approach to analyze time-related data, such as monthly sales data or yearly profits. The patterns it discovers can be used to predict values for future time steps.
16266 Specifies the seed number used to randomly generate clusters for the initial stage of model building.
16267 Specifies the maximum number of states for a non-sequence attribute that the algorithm supports. If the number of states for a non-sequence attribute is greater than the maximum number of states, the algorithm uses the attribute's most popular states and treats the remaining states as missing.
16268 Specifies the maximum number of states that a sequence can have. Setting this value to a number greater than 100 can result in a meaningless model.
16269 Specifies the number of historic models that will be built.
16270 Specifies the time lag between two consecutive historic models. For example, setting this value to g results in historic models being built for data truncated by time slices at intervals of g, 2*g, 3*g, and so on.
16271 Processing query
16272 Training column: [%s]
16273 Scoring model: [%ld] cases seen.
16274 Training mining model
16275 Training marginal model: %ld cases seen.
16276 Training clusters: candidate model %ld, iteration %ld
16277 Training clusters: %ld cases scanned.
16278 Culling feature set.
16279 Training trees (counting correlations): %ld cases counted.
16280 Training trees: Building %ld tree(s). %ld cases left to classify.
16281 Training association rules: Generating %ld-itemsets.
16282 Training association rules: Generating rules.
16283 Training association rules: Reorganizing cases.
16284 Microsoft Neural Network
16285 The Microsoft Neural Network algorithm uses a gradient method to optimize parameters of multilayer networks to predict mutiple attributes. It can be used for classification of discrete attributes as well as regression of continuous attributes.
16286 Specifies the percentage of training cases used to calculate the holdout error, which is used as part of the stopping criteria during neural network learning.
16287 Specifies the seed used to randomly generate the holdout data. If the seed is not specified, the algorithm generates the seed based on the model name; this ensures content remains the same when the model is reprocessed.
16288 Information not available for this release.
16289 Specifies the maximum number of input attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 disables feature selection for input attributes.
16290 Specifies the maximum number of output attributes that the algorithm can handle before invoking feature selection. Setting this value to 0 disables feature selection for output attributes.
16291 Specifies the maximum number of attribute states that the algorithm supports. If the number of states that an attribute has is greater than the maximum number of states, the algorithm uses the attribute's most popular states and treats the remaining states as missing.
16292 Specifies the number of cases that are used to train the model. The algorithm either uses the number specified by SAMPLE_SIZE or total_cases * (1 - HOLDOUT_PERCENTAGE/100), depending on which one is smaller.
16293 Specifies a number used in determining the number of nodes in the hidden layer. The algorithm calculates the number of nodes in the hidden layer as HIDDEN_NODE_RATIO * sqrt({the number of input nodes} * {the number of output nodes}).
16294 Information not available for this release.
16295 Information not available for this release.
16296 Training mining model
16297 Started training algorithm: [%s]
16298 Finished training algorithm: [%s]
16299 Specifies the method used to fill the gaps in historical data. By default, irregular gaps or ragged edges in data are not allowed. The methods available to fill in irregular gaps or edges are: by Previous value, by Mean value, or by specific numerical constant.
16300 Specifies a numerical value between 0 and 1 used to detect periodicity. Setting this value closer to 1 favors discovery of many near-periodic patterns and automatic generation of periodicity hints. Dealing with a large number of periodicity hints will likely lead to significantly longer model training times. If the value is closer to 0, periodicity is detected only for strongly periodic data.
16301 Training the neural network: %ld subnets left to train.
16302 Training the subnet. Holdout error = %e
16303 Forces the algorithm to use the indicated columns as regressors in the regression formula regardless of their importance as calculated by the algorithm. This parameter is only used for regression trees.
16304 Specifies the minimum dependency probability between input and output attributes. This value is used to limit the size of the content generated by the algorithm. This property can be set from 0 to 1. Increasing this value reduces the number of attributes in the model.
16305 Information not available for this release.
16306 Reading cases: %ld cases read.
16307 Hidden deprecated parameter supreceded by MINIMUM_SUPPORT. Specifies the minimum number of cases in each cluster.
16308 Hidden deprecated parameter supreceded by MINIMUM_SUPPORT. Specifies the minimum number of cases in each cluster.
16309 Hidden deprecated parameter supreceded by MINIMUM_SUPPORT. Specifies the minimum number of time slices required to generate a split in each time series tree.
16310 Specifies the lower constraint for any time series prediction. Predicted values will never be smaller than this constraint.
16311 Specifies the upper constraint for any time series prediction. Predicted values will never be greater than this constraint.
16312 Specifies the minimum number of cases that a leaf node must contain. Setting this value to less than 1 specifies the minimum number of cases as a percentage of the total cases. Setting this value to a whole number greater than 1 specifies the minimum number of cases as the absolute number of cases.
16313 Hidden parameter used in cluster count autopick. Defines how much on average the target cluster count is alloed to deviate from CLUSTER_COUNT_PRIOR.
16314 Hidden parameter used in cluster count autopick. Prior mean for the target cluster count.
16315 Automatic feature selection has been applied to model, %{modelname/} due to the large number of attributes. Set MAXIMUM_INPUT_ATTRIBUTES and/or MAXIMUM_OUTPUT_ATTRIBUTES to increase the number of attributes considered by the algorithm.
16316 Decision Trees found no splits for model, %{modelname/}.
16317 Decision Trees found no appropriate regressors for model, %{modelname/}.
16318 Cardinality reduction has been applied on column, %{colname/} of model, %{modelname/} due to the large number of states in that column. Set MAXIMUM_STATES to increase the number of states considered by the algorithm.
16319 Cardinality reduction has been applied on column, %{colname/} of model, %{modelname/} due to the large number of states in that column. Set MAXIMUM_SEQUENCE_STATES to increase the number of states considered by the algorithm.
16320 No data other than NULL was found in column, %{colname/} of model, %{modelname/}.
16321 Due to memory limitations, Association Rules algorithm adjusted the MINIMUM_SUPPORT to %{support/} for model %{modelname/}.
16322 The Assocation Rules algotihm found no frequernt itemsets adhering to model parameters for model %{modelname/}.
16323 Assocation Rules found no rules adhering to model parameters for model %{modelname/}.
16324 Model processing starting with %{number/} attributes for model, %{modelname/}.
16325 Clustering on model, %{modelname/}, converged after seeing %{number/} cases.
16326 Clustering complete on model, %{modelname/}, with %{number/} clusters.
16327 Learning Time Series tree for '%s' in main model ...
16328 Learning Time Series tree for '%s' in historical model number %ld ...
16329 Information not available for this release.
16330 Ensures that the dependency net graph generated is acyclic.
16601 The specified '%{structure/}' source mining structure was not found for the '%{model/}' model.
16602 The %{column/} column of the %{model/} mining model has no key column.
16603 The %{column/} column of the %{structure/} mining structure contains content that is not valid.
16604 No type is specified for the '%{column/}' column of the '%{structure/}' mining structure.
16605 An unsupported type is specified for the '%{column/}' column of the '%{structure/}' mining structure.
16606 The distribution on the '%{column/}' column of the '%{structure/}' mining structure is not valid.
16607 A usage that is not valid is specified for the '%{column/}' column of the '%{model/}' mining model.
16608 The '%{column/}' column of the '%{structure/}' mining structure has no key column.
16609 A mining model named '%{modelname/}' already exists in the current database.
16610 A mining model with the '%{modelid/}' ID already exists in the current database.
16611 The CLUSTERING_METHOD parameter for the %{modelname/} model is not valid. Valid values are 1, 2, 3, and 4.
16612 The CLUSTER_COUNT parameter for the %{modelname/} model is not valid. CLUSTER_COUNT must be non-negative.
16613 The MINIMUM_SUPPORT parameter for the %{modelname/} model is not valid. MINIMUM_SUPPORT must be greater than 0.
16614 The MODELLING_CARDINALITY parameter for the %{modelname/} model is not valid. MODELLING_CARDINALITY must be greater than 0.
16615 The STOPPING_TOLERANCE parameter for the '%{modelname/}' model is not valid. STOPPING_TOLERANCE must be integer and greater than 0.
16616 The SAMPLE_SIZE parameter for the '%{modelname/}' model is not valid. SAMPLE_SIZE must be 0 or at least 100.
16617 The MAXIMUM_INPUT_ATTRIBUTES parameter for the '%{modelname/}' model is not valid. MAXIMUM_INPUT_ATTRIBUTES must be greater than 0.
16618 The '%{cubeid/}' cube referenced in the binding for the OLAP mining structure, '%{structure/}' (column='%{column/}'), does not exist.
16619 A source binding is missing for the OLAP mining structure, '%{structure/}' (column='%{column/}', nested column='%{nestedcolumn/}').
16620 The '%{cubedimension/}' dimension referenced in the binding for the OLAP mining structure, '%{structure/}' (column='%{column/}'), does not exist.
16621 The '%{structure/}' mining structure does not have a case key column.
16622 The '%{structure/}' mining structure is already trained.
16623 The '%{structure/}' mining structure has not been trained.
16624 The operation cannot be performed while the '%{structure/}' mining model is being trained.
16625 The mining model, %{modelname/}, does not support continuous attributes as input.
16626 The mining model, %{modelname/}, does not support continuous attributes as predictables.
16627 The MAXIMUM_INPUT_ATTRIBUTES parameter for the '%{modelname/}' model is not valid. MAXIMUM_INPUT_ATTRIBUTES must be at least 0 and at most %d{Max/}.
16628 The MAXIMUM_OUTPUT_ATTRIBUTES parameter for the '%{modelname/}' model is not valid. MAXIMUM_OUTPUT_ATTRIBUTES must be at least 0 and at most %d{Max/}.
16629 The SCORE_METHOD parameter for the '%{modelname/}' model is not valid. SCORE_METHOD must be 1, 3, or 4.
16630 The SPLIT_METHOD parameter for the '%{modelname/}' model is not valid. SPLIT_METHOD must be 1, 2, or 3.
16631 The MINIMUM_LEAF_CASES parameter for the '%{modelname/}' model is not valid. MINIMUM_LEAF_CASES must be greater than 0.
16632 The COMPLEXITY_PENALTY parameter for the '%{modelname/}' model is not valid. COMPLEXITY_PENALTY must be greater than 0 and less than 1.
16634 '%{Name/}' is not a valid node name.
16635 The '%{modelname/}' model cannot be loaded from the persisted file. The file is either damaged or in a format that is not supported.
16636 The FROM clause is not valid at line %d{Line/}, column %d{Column/}.
16637 An expression that returns a table is not allowed in an operation at line %d{Line/}, column %d{Column/}.
16638 Only an expression that returns a table is allowed in the first argument of a Top or Bottom function. The error occurred at line %d{Line/}, column %d{Column/}.
16639 Only a constant expression that returns a positive number is allowed in the third argument of a Top or Bottom function. The error occurred at line %d{Line/}, column %d{Column/}.
16640 An unexpected DMX expression was found at line %d{Line/}, column %d{Column/}.
16641 Only a scalar column reference is allowed in the prediction function at line %d{Line/}, column %d{Column/}.
16642 Only a discretized column is allowed in a range prediction function at line %d{Line/}, column %d{Column/}.
16643 Cluster prediction functions are not allowed in the context at line %d{Line/}, column %d{Column/}.
16645 Either the user, %{strUser/}, does not have permission to access the referenced mining model, %{strName/}, or the object does not exist.
16646 The '%{Name/}' referenced model has not been processed.
16647 The specified DMX column was not found in the context at line %d{Line/}, column %d{Column/}.
16648 The specified DMX column is not allowed in the context at line %d{Line/}, column %d{Column/}.
16649 The dot expression is not allowed in the context at line %d{Line/}, column %d{Column/}. Use sub-SELECT instead.
16650 Only a predictable column (or a column that is related to a predictable column) can be referenced from the mining model in the context at line %d{Line/}, column %d{Column/}.
16651 The table column reference is not supported in the context at line %d{Line/}, column %d{Column/}.
16652 The predict length or range specification is not valid at line %d{Line/}, column %d{Column/}.
16653 An unknown DMX expression was encountered at line %d{Line/}, column %d{Column/}.
16654 A * is not allowed in the context at line %d{Line/}, column %d{Column/}.
16655 A Boolean expression is not allowed in the context at line %d{Line/}, column %d{Column/}.
16656 A Boolean expression is expected at line %d{Line/}, column %d{Column/}.
16657 Aggregate expression cannot be used with non-aggregate expressions at line %d{Line/}, column %d{Column/}.
16658 UNION contains incompatible sub-SELECT expressions at line %d{Line/}, column %d{Column/}. They must have the same number of columns in SELECT-list.
16659 A column reference that is not valid in the context appears at line %d{Line/}, column %d{Column/}.
16660 The function cannot be used in the context at line %d{Line/}, column %d{Column/}.
16661 An incorrect number of arguments are used in the function at line %d{Line/}, column %d{Column/}.
16662 The second argument in a Top or Bottom function must be a column. The error occurred at line %d{Line/}, column %d{Column/}.
16663 An argument that is not valid is used in the prediction function at line %d{Line/}, column %d{Column/}.
16664 Cluster prediction is not supported in the algorithm that is being used.
16665 Sequence prediction is not supported in the algorithm that is being used.
16666 The MAXIMUM_INPUT_ATTRIBUTES parameter for the %{modelname/} model is not valid. MAXIMUM_INPUT_ATTRIBUTES must be at least 0 and at most %d{Max/}.
16667 The MAXIMUM_OUTPUT_ATTRIBUTES parameter for the %{modelname/} model is not valid. MAXIMUM_OUTPUT_ATTRIBUTES must be at least 0 and at most %d{Max/}.
16668 The Na∩ve Bayes algorithm does not support a continuous output attribute on the %{modelname/} model.
16669 Multiple nonkey columns were detected in the sequence table in the %{modelname/} model. The Microsoft Sequence Clustering algorithm only accepts sequence tables with one nonkey column.
16670 Multiple sequence key columns were detected in the sequence table in the %{modelname/} model. The Microsoft Sequence Clustering algorithm only accepts tables with one sequence key column.
16671 The '%{modelname/}' mining model cannot be loaded. Error tag: %{tag/}.
16672 The algorithm does not support the functionality requested by the '%{modelname/}' model.
16673 Incorrect version loading content for the '%{modelname/}' mining model.
16674 The source OLAP object for the '%{columnname/}' column of the '%{modelname/}' model cannot be found.
16675 The requested result format is not valid for a DMX query.
16676 An unknown algorithm parameter, %{strParamName/}, was supplied for the %{modelname/} model.
16677 The MINIMUM_SUPPORT parameter for the '%{modelname/}' model is not valid. MINIMUM_SUPPORT must be greater than or equal to 0.
16678 The MAXIMUM_SUPPORT parameter for the '%{modelname/}' model is not valid. MAXIMUM_SUPPORT must be greater than 0.
16679 The MINIMUM_ITEMSET_SIZE parameter for the '%{modelname/}' model is not valid. MINIMUM_ITEMSET_SIZE must be between 1 and 500.
16680 The MAXIMUM_ITEMSET_SIZE parameter for the '%{modelname/}' model is not valid. MAXIMUM_ITEMSET_SIZE must be between 0 and 500.
16681 The MAXIMUM_ITEMSET_COUNT parameter for the '%{modelname/}' model is not valid. MAXIMUM_ITEMSET_COUNT must be greater than or equal to 1.
16682 The MINIMUM_PROBABILITY parameter for the '%{modelname/}' model is not valid. MINIMUM_PROBABILITY must be between 0 and 1.
16683 The WHERE clause in the SELECT ... FROM m.SAMPLE_CASES statement must contain the IsInNode function.
16684 Drillthrough (SELECT ... FROM m.SAMPLE_CASES) is not enabled for the '%{Name/}' model.
16685 The MAXIMUM_STATES parameter for the '%{modelname/}' model is not valid. MAXIMUM_STATES must be between %d{Min/} and %d{Max/} or 0 to specify no limit.
16686 Time series prediction is not supported by the algorithm that is being used.
16687 The SELECT type is not supported for the '%{Name/}' model.
16688 The '%{Param/}' data mining parameter is not valid for the '%{Name/}' model.
16689 A catalog is not set for this session. The query cannot be executed.
16690 PMML parsing failed at line %{Line/}, column %{Column/}: %{strMessage/}
16691 Cannot parse mining model due to malformed PMML.
16692 The %{name/} structure is created from a PMML model. This processing option cannot be applied to PMML-based structures.
16693 The data type of the %{structure/}.%{dmscolumn/} mining structure column does not match the type of its binding.
16694 The data type of the %{structure/}.%{dmscolumn/} mining structure column must be numeric since it has a continuous content type (Content is set to Continuous or Key Time or Key Sequence).
16695 In the mining model, %{modelname/}, the %{colname/} column must be of a continuous type since the REGRESSOR modeling flag is set on it.
16696 The algorithm does not support KEY TIME or KEY SEQUENCE columns.
16697 The algorithm requires at least one predictable attribute. None found in mining model, %{modelname/}.
16698 Only a nested table column with a KEY SEQUENCE column can be used in a sequence prediction function. The error occurred at line %d{Line/}, column %d{Column/}.
16699 Only a top-level column or a nested table column with a KEY TIME column inside can be used in a time series prediction function. See line %d{Line/} in column %d{Column/}.
16700 The PERIODICITY_HINT parameter for the mining model, %{modelname/}, is not valid. PERIODICITY_HINT should be {n1, n2, n3...}, with n being greater than 0
16701 No cases were specified in the mining model, %{modelname/}.
16702 The time series case set must be sparse when containing only one case.
16703 The %{column/} column of the %{Name/} model contains a content type that is not supported by the algorithm.
16704 The '%{column/}' column of the '%{Name/}' model contains the '%{flag/}' modeling flag, which is not supported by the algorithm
16705 The specified cluster ID is out of range for the mining model, %{modelname/}.
16706 DISTINCT is not allowed in the type of SELECT statement found at line %d{Line/}, column %d{Column/}.
16707 The OPTMIZED_PREDICTION_COUNT parameter for the '%{modelname/}' model is not supported. OPTMIZED_PREDICTION_COUNT must be between 0 and 50.
16708 A SET clause that is not supported appears in the UPDATE statement at line %d{Line/}, column %d{Column/}.
16709 PREDICTION JOIN is not supported for the %{Name/} model.
16710 Only a nested table column with a KEY column inside is allowed in an association prediction function. See line %d{Line/}, column %d{Column/}.
16711 Ad hoc connections as specified in OPENROWSET clauses cannot be used on this server.
16712 This server is not configured to support the '%{Provider/}' provider used in the OPENROWSET clause.
16713 The MAXIMUM_STATES parameter for the '%{modelname/}' model is not supported. MAXIMUM_STATES must be 0, 2, or at most %d{Max/}.
16714 An error occurred while an internal object was being created.
16715 The COMPLEXITY_PENALTY parameter for the mining model, %{modelname/}, is not valid. It must be less than 1.
16716 The MIN_LEAF_CASES parameter for the mining model, %{modelname/}, is not valid. It cannot be less than 1.
16717 The mining model, %{modelname/}, accepts only continuous attributes as input.
16718 There is a non-discrete sequence node attribute in the %{modelname/} model. The Microsoft Sequence Clustering algorithm requires this attribute to be of type Discrete.
16719 The PMML-based '%{name/}' mining structure can only be altered for adding bindings to data. No other options for altering the structure are supported.
16720 The PMML-based mining structure or model named '%{name/}' cannot be processed with out-of-line bindings
16721 The mining model , %{name/} is already trained and does not support incremental updates. Before using the INSERT INTO statement, use DELETE FROM <object>.
16722 The count of the specified columns does not match the count of the mining model columns or the input rowset columns.
16723 The HISTORIC_MODEL_COUNT parameter for the mining model, %{modelname/}, is not valid. The count must not be negative and cannot be more than 100. Use 0 for no historic model generation.
16724 The HISTORIC_MODEL_GAP parameter for the mining model, %{modelname/}, is not valid. The gap between the mining models must be greater than 0. The parameter value has no effect if HISTORIC_MODEL_COUNT is 0.
16725 Time stamps not synchronized starting with series %{column/}, of the mining model, %{modelname/}. All time series must end at the same time mark and cannot have arbitrarily missing data points. Setting the MISSING_VALUE_SUBSTITUTION parameter to Previous or to a numeric constant will automatically patch missing data points where possible.
16726 Only one column can be referenced in SELECT DISTINCT statement.
16727 A sequence node column was not found in the %{modelname/}, model. The Microsoft Sequence Clustering algorithm requires a nested table containing sequence key and sequence node columns.
16728 The algorithm for the '%{modelname/}' model does not support drillthrough.
16729 The HOLDOUT_PERCENTAGE parameter for the mining model, %{modelname/}, is not valid. HOLDOUT_PERCENTAGE must be greater than 0 and less than 100.
16730 The MAXIMUM_CLUSTER_COUNT parameter is negative in the '%{modelname/}' Microsoft Sequence Clustering model. MAXIMUM_CLUSTER_COUNT must be either positive or 0.
16731 The MINIMUM_SUPPORT parameter is negative in the '%{modelname/}' Microsoft Sequence Clustering model. MINIMUM_SUPPORT must be either positive or 0.
16732 The value for the MAXIMUM_STATES parameter is not valid in the '%{modelname/}' Microsoft Sequence Clustering model.
16733 The value for the MAXIMUM_SEQUENCE_STATES parameter is not valid in the '%{modelname/}' Microsoft Sequence Clustering model.
16734 The data type of a foreign key binding (ordinal=%{iOrdinal/}) for the '%{tablecolumn/}' nested table does not match the data type of the corresponding key binding for the '%{casekeycolumn/}' case key of the '%{structure/}' mining structure.
16735 The INSERT INTO statement can be used only for mining models that have no siblings in the same mining structure. Try using INSERT INTO Mining Structure instead
16736 The continuous key column reference (KEY TIME, KEY SEQUENCE) is not supported in a SELECT DISTINCT statement at line %d{Line/}, column %d{Column/}.
16737 A time series prediction was requested with a start time further in the past than the internal models of the mining model, %{modelname/}, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.
16738 The '%{name/}' object cannot be processed with the specified bindings (the structure of the internal objects would be changed). An ALTER statement can be used to change the bindings before processing.
16739 A time series structure was defined without a Key Time column. One Key Time column must be defined.
16740 The time series Key Time column has a data type that is not valid. A Key Time column must have a numeric or date/time/timestamp data type.
16741 The DataSourceID for the '%{name/}' OLAP mining structure must be set to the current database ('.').
16742 KEY SEQUENCE columns are not supported at the case level. The '%{column/}' column of the '%{structure/}' mining structure contains content that is not valid.
16743 The '%{model/}' mining model does not contain any cases. The drillthrough store is empty either because the ProcessType enumeration was set to ProcessClearStructureOnly, or a DMX DELETE statement cleared the store.
16744 The '%{column/}' column does not support the DMX statement, INSERT INTO <model>.COLUMN_VALUES. Only DISCRETE or DISCRETIZED columns support this operation.
16745 The '%{name/}' structure does not contain bindings to data (or contains bindings that are not valid) and cannot be processed.
16746 In the '%{parentStruct/}' structure, the '%{name/}' column does not contain valid bindings to data and cannot be processed.
16747 The '%{structure/}' mining structure has multiple key columns on one level.
16748 The '%{datasourceview/}' data source view ID of the '%{name/}' mining structure does not correspond to an existing data source view in the database.
16749 The DISCRETIZED statement can be only used for numeric columns. [Column='%{ColumnName/}'].
16750 The CLUSTER_SEED parameter for the '%{modelname/}' model is not valid. CLUSTER_SEED must be non-negative.
16751 The '%{name/}' persisted file cannot be found.
16752 Either an error occurred while cases were being read or the operation was cancelled.
16753 INSERT INTO error: The '[%{table/}].[%{column/}]' nested table key column is not bound to an input rowset column.
16754 The MAXIMUM_BUCKETS_FOR_CONTINUOUS_SPLIT parameter for the '%{modelname/}' model is not valid. MAXIMUM_BUCKETS_FOR_CONTINUOUS_SPLIT must be greater than 0 and less than %d{Max/}.
16755 An error occurred while the '%{dimension/}' data mining dimension with the '%{miningmodel/}' source mining model was being processed. The algorithm of the source model returned data mining dimension content information that is not valid.
16756 The MAXIMUM_INPUT_ATTRIBUTES parameter for the '%{modelname/}' model is not valid. MAXIMUM_INPUT_ATTRIBUTES must be at least 0 and at most %d{Max/}.
16757 The MAXIMUM_OUTPUT_ATTRIBUTES parameter for the '%{modelname/}' model is not valid. MAXIMUM_OUTPUT_ATTRIBUTES must be at least 0 and at most %d{Max/}.
16758 The MAXIMUM_STATES parameter for the '%{modelname/}' model is not valid. MAXIMUM_STATES must be 0, or between 2 and %d{Max/}.
16759 The SAMPLE_SIZE parameter for the %{modelname/} model is not valid. SAMPLE_SIZE must be at least 0.
16760 The HIDDEN_NODE_RATIO parameter for the %{modelname/} model is not valid. HIDDEN_NODE_RATIO must be at least 0.
16761 The HOLDOUT_TOLERANCE parameter for the '%{modelname/}' model is not valid. HOLDOUT_TOLERANCE must be greater than 0.
16762 The BRENT_TOLERANCE parameter for the %{modelname/} model is not valid. BRENT_TOLERANCE must be greater than 0.
16763 The MINIMUM_SUPPORT parameter for the %{modelname/} model is not valid. MINIMUM_SUPPORT must be greater than 0.
16799 The '%{AlgoName/}' data mining algorithm is not available for use with local mining models.
16800 The data mining algorithm used by the %{ModelName/} model is not available to this connection.
16801 The algorithm provider for the '%{AlgoName/}' data mining algorithm cannot be created; its ProgID is missing in the server configuration file.
16802 The '%{ServiceName/}' service which was returned by the '%{ProgID/}' data mining algorithm, does not match its '%{AlgoName/}' algorithm in the server configuration file.
16803 The functions IsInNode or IsDescendant should be used only once and no OR operator should be used together at line %d{Line/}, column %d{Column/}.
16804 The function call at line %d{Line/}, column %d{Column/} is not valid.
16805 The function specified at line %d{Line/}, column %d{Column/} is neither a user-defined function (UDF), nor is it a custom function supported by the plug-in algorithm.
16806 The algorithm provider for the %{AlgoName/} data mining algorithm does not expose a mandatory interface for custom functions.
16807 Only a constant expression is allowed for the '%{ArgumentIndex/}' argument of the function '%{FunctionName/}' at line %d{Line/}, column %d{Column/}.
16808 Only a scalar column reference is allowed for argument %{ArgumentIndex/} of the function '%{FunctionName/}' at line %d{Line/}, column %d{Column/}.
16809 Only a table column reference is allowed for the '%{ArgumentIndex/}' argument of the function '%{FunctionName/}' at line %d{Line/}, column %d{Column/}.
16810 An invalid type of value is specified for the '%{ArgumentIndex/}' argument of the function '%{FunctionName/}' at line %d{Line/}, column %d{Column/}.
16811 Too many arguments or flags were supplied for the function at line %d{Line/}, column %d{Column/}.
16812 Unknown flag for the function at line %d{Line/}, column %d{Column/}.
16813 Mandatory function parameters must be supplied prior to flags for the function at line %d{Line/}, column %d{Column/}.
16814 Error evaluating function '%{FunctionName/}' at line %d{Line/}, column %d{Column/}'
16815 Invalid '%{FlagName/}' modeling flag for the '%{ColumnName/}' mining structure column. Algorithm-specific modeling flags can only be used with mining model columns.
16816 The '%{column/}' column of the '%{structure/}' mining structure contains more than one classified column.
16817 The %{column/} column of the %{structure/} mining structure must be discrete since it classifies another column.
16818 The %{classifiedcolumn/} column of the %{structure/} mining structure must be discrete since it is classified by the %{column/} column.
16819 The %{classifiedcolumn/} ClassifiedColumn id specified under %{column/} column of the %{structure/} mining structure does not exist.
16820 The FORCE_REGRESSOR parameter for the '%{modelname/}' model is not valid. The '%{strParamName/}' column must be an input and regressor.
16821 GROUP BY is not allowed in the type of SELECT statement at line %d{Line/}, column %d{Column/}.
16822 JOIN is not allowed in the type of SELECT statement at line %d{Line/}, column %d{Column/}.
16823 The provider used by the '%{datasource_name/}' data source referenced in the OPENQUERY clause cannot be used by this instance.
16824 Either the user, %{strUser/}, does not have permission to access the referenced mining structure, %{strName/}, or the object does not exist.
16825 The EXPORT statement is not supported for OLAP mining structures, like %{Name/}
16826 The server has reached its limit of (%d{cMaxQueries/}) for concurrent data mining queries. Try your query again.
16827 A chapter column is not supported for parameters or return value of the UDF at %d{Line/}, column %d{Column/}.
16828 \n The user-defined function (UDF) returned an inconsistent number of columns at line %d{Line/}, column %d{Column/}. \n
16829 '%{strAttrName/}' is not a valid attribute display name.
16830 DiscretizationMethod/DiscretizationBucketCount cannot be specified for the '%{column/}' column of the '%{structure/}' mining structure - it is not Discretized.
16831 The '%{structureCol/}' source structure column for the '%{modelCol/}' mining model column is not a table or contains no nested columns.
16832 The '%{column/}' table column of the '%{structure/}' mining structure has no child columns.
16833 The specified algorithm cannot handle columns of the mining model, %{modelname/}, with content of type 'Probability'. [Column=%{ColumnName/}].
16834 The specified algorithm cannot handle columns of the mining model, %{modelname/}, with content of type 'Support'. [Column=%{ColumnName/}].
16835 The specified algorithm cannot handle columns of the mining model, %{modelname/}, with content of type 'ProbabilityVariance'. [Column=%{ColumnName/}].
16836 The specified algorithm cannot handle columns of the mining model, %{modelname/}, with content of type 'ProbabilityStddev'. [Column=%{ColumnName/}].
16837 The specified algorithm cannot handle columns of the mining model, %{modelname/}, with content of type 'Stddev'. [Column=%{ColumnName/}].
16838 The specified algorithm cannot handle columns of the mining model, %{modelname/}, with content of type 'Variance'. [Column=%{ColumnName/}].
16839 The '%{structureCol/}' source structure column for the '%{modelCol/}' mining model column was not found.
16840 A value in the input column '%{inputCol/}' could not be converted to the type of the mining model column '%{modelCol/}'.
16841 For each OLAP mining structure column there must be an enabled attribute hierarchy. The '%{structureCol/}' OLAP mining structure column has no attribute hierarchy enabled.
16842 The source attribute for the classified '%{structureCol/}' OLAP mining structure column is not part of a natural hierarchy that matches the mining column hierarchy.
16843 Processing the '%{name/}' mining model failed because either the training data is empty or there were no significant attributes found.
16844 The '%{structureCol/}' column of the '%{structure/}' mining structure cannot contain null values (the column is either modeled 'NOT NULL' or is a nested table key), but its source data contains null values.
16845 The '%{name/}' mining structure or model has sibling models and cannot be processed alone with out-of-line bindings. The whole mining structure should be processed.
16846 The algorithm used requires at least one input attribute. None was found in the mining model, %{modelname/}.
16847 Prediction join query is not valid because the ON clause joins a table input column to the '%{modelcol/}' scalar mining model column.
16848 Prediction join query is not valid because the ON clause joins a scalar input column to the '%{modelcol/}' table mining model column.
16849 The key column of a nested table was not bound in a prediction join query.
16850 The values of a continuous key column (that is, a column whose content type is set to 'KEY TIME' or 'KEY SEQUENCE') cannot be accessed by using the MiningModelColumn.Values collection.
16851 The DataType element of the binding for a mining structure column, whose content type is set to Date, must be also set to Date.
16852 Import cannot be completed, because an object with the name '%{objectname/}' or with the ID '%{objectid/}' already exists in the destination database.
16853 Cannot convert the '%{value/}' value to the data type of the '%{columnname/}' mining model column.
16854 In the '%{modelname/}' mining model, the MODEL_EXISTENCE_ONLY modelling flag is not allowed in the '%{colname/}' key column.
16855 Error validating attributes for the '%{modelname/}' mining model.
16856 The value specified for the MINIMUM_DEPENDENCY_PROBABILITY parameter of the '%{modelname/}' mining model is not valid. The MINIMUM_DEPENDENCY_PROBABILITY parameter must be set to a value greater than 0.0 and less than 1.0.
16857 The '%{dimensionid/}' dimension referenced in the binding for the '%{structure/}' OLAP mining structure does not exist.
16858 The '%{mgid/}' measure group referenced in the binding for the '%{column/}' mining column of the '%{structure/}' OLAP mining structure does not exist.
16859 The OLAP binding of the '%{column/}' nested table should reference the same cube as the binding of the '%{struct/}' mining structure.
16860 The '%{mid/}' measure referenced in the binding for the '%{structure/}' OLAP mining structure column named '%{column/}' does not exist.
16861 The MISSING_VALUE_SUBSTITUTION parameter for the mining model, %{modelname/}, is not valid. Supported choices are None, Previous or a numeric value
16862 Only a non-negative integer constant is allowed for TOP expression at line %d{Line/}, column %d{Column/}.
16863 Only one order expression is allowed for TOP expression at line %d{Line/}, column %d{Column/}.
16864 Training set is too small for the mining model, %{modelname/}. The number of training cases should be greater than the MINIMIUM_CLUSTER_CASES value.
16865 PMML 2.1 parsing error(line %{Line/}, column %{Column/}). A required attribute, '%{attr/}', was not found for the tag '%{tag/}'
16866 PMML 2.1 parsing error(line %{Line/}, column %{Column/}). The '%{child/}' child tag is required, but was not found inside the '%{parent/}' parent tag, or it was not valid.
16867 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). The '%{attr/}' attribute of the '%{objName/}' object was previously defined with a different value.
16868 PMML 2.1 structural error(line %{Line/}, column %{Column/}). The '%{tagSecond/}' element is only supported after the '%{tagFirst/}' element.
16869 PMML 2.1 parsing error(line %{Line/}, column %{Column/}). The '%{attr/}' attribute of the '%{tag/}' tag has an unexpected value
16870 PMML 2.1 parsing error(line %{Line/}, column %{Column/}). The '%{tag/}' tag was unexpected or unsupported.
16871 The model inside the PMML 2.1 document uses an algorithm that is not supported.
16872 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). A '%{tag/}' object with the same name ('%{name/}') was already declared.
16873 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). An object of type '%{tag/}' identified by '%{name/}' is referred without being previously declared.
16874 PMML 2.1 parsing error(line %{Line/}, column %{Column/}). An invalid compact array was encountered.
16875 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). An Interval is only supported for continuous data fields and it must have at least one margin .
16876 PMML 2.1 parsing error(line %{Line/}, column %{Column/}). Unsupported content found inside the '%{tag/}' element.
16877 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). The '%{tag/}' element is supported only if it contains exactly 2 Arrays (states and counts), which have the same number of elements. The elements must be greater than 0.
16878 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). NumericInfo is only supported for continuous data fields.
16879 PMML 2.1 consistency error(line %{Line/}, column %{Column/}). DiscrStats is only supported for discrete or discretized data fields.
16880 Invalid sequence cluster caption passed into Cluster Membership function applied to the mining model, %{modelname/}.
16881 The MISSING_VALUE_SUBSTITUTION parameter for the mining model, %{modelname/}, has a value that is not valid. Valid settings are None, Previous, or a numeric value.
16882 A case that is not valid has been passed to the GetLag() function that is used with the '%{modelname/}' mining model. A time series model requires a time stamp to be present in each case.
16883 Invalid Time Series node unique ID encountered in the mining model, %{modelname/}. Make sure node unique IDs are consistent with those obtained by content discovery.
16884 Too many attributes for counting correlations.
16885 Prediction query timeout limit is too small for this Time Series prediction request based on mining model, %{modelname/}.
16886 The specified node property ID is either not valid or not supported.
16887 Bad input case encountered with multiple consecutive sequence node occurencies while processing data for mining model, %{modelname/}.
16888 Bad input case encountered. Sequence node data is not found where expected in the input case while processing data for mining model, %{modelname/}.
16889 Error in evaluating a user-defined function at line %d{Line/}, column %d{Column/}.
16890 No non-key columns were defined in Time Series mining model, %{modelname/}. Hence no data can be retrieved for analysis.
16891 While using an INSERT INTO statement to train the '%{structure/}' mining structure, the '%{column/}' nested table column was bound to a scalar column in the input rowset.
16892 Case processor detects repeated KeyTime values ('time stamps') applicable to the same Time Series while processing data for mining model, %{modelname/}. Recommend pre-processing the data to eliminate repeated time stamps.
16893 In the '%{model/}' mining model, a request to the '%{attribute/}' attribute for marginal statistics failed, because the attribute is neither input nor output.
16894 The GlobalStats section of the PMML document is missing or damaged.
16895 The algorithm content of the '%{model/}' mining model is missing or damaged.
16896 The number of foreign key bindings for the '%{tablecolumn/}' nested table does not match the number of key bindings for the '%{casekeycolumn/}' case key of the '%{structure/}' mining structure.
16897 The '%{model/}' mining model has %d{cAttributes/} attributes. This number of attributes exceeds the attribute limit of %d{cAttributeLimit/} allowed by the current version of the algorithm associated with the mining model.
16898 Usage of all non-key columns in the '%{model/}' mining model must be set to PredictOnly.
16899 The '%{model/}' mining model cannot have more than one predictable attribute.
16900 The '%{model/}' mining model has a column that uses the DATE data type. This data type is not supported by the PMML 2.1 specification. The DATE data type can typically be converted to the DOUBLE data type as a workaround, which is supported by the PMML 2.1 specification.
16901 An overflow was encountered while converting a predicted value to the '%{ColumnName/}' column, at line %d{Line/}, column %d{Column/}. A higher precision data type for the column is recommended.
16902 In the '%{parentStruct/}' mining structure, the '%{name/}' column is bound to a database column whose data type is set to Binary. This data type typically represents unstructured data, which cannot be processed.
16903 The '%{structure/}' OLAP mining structure cannot be processed since the operational storage mode of the '%{dimension/}' dimension referenced in the binding for the '%{column/}' column is not MOLAP.
16904 Either the user, %{strUser/}, does not have permission to access the referenced mining model or structure, %{strName/}, or the object does not exist.
16905 The '%{Name/}' name does not uniquely identify the mining model or mining structure. Try to qualify this name by prefixing it with 'MINING STRUCTURE' or 'MINING MODEL'.
16906 The '%{Name/}' mining structure column has a prediction qualifier. Prediction qualifiers, such as PREDICT or PREDICT ONLY, cannot be applied to mining structure columns.
16907 The DELETE FROM CASES statement is only supported for mining structures. '%{Name/}' is a mining model.
16908 The '%{column/}' column of the '%{Name/}' mining model contains the '%{flag/}' modeling flag which is only supported for mining structure columns
16909 The ON clause at line %d{Line/}, column %d{Column/}, is not valid. Columns specified in the ON clause must be scalar, and one column in a binding must be from the mining model while another column must be from the input source.
16910 The usage for the '%{column/}' column of the '%{model/}' mining model must be set to Key, because its source mining structure column is a key column.
16911 Session mining objects (including special data source views used to process data mining dimensions) cannot be created on this instance.
16912 This feature requires first degree statistics that are not available with the algorithm used for the '%{model/}' mining model.
16913 A general exception generated by Time Series algorithm while working with the mining model, %{modelname/} - likely due to a resource constraint such as insufficient memory. Recommend rerunning the algorithm with more resources available.
16914 Time Series algorithm could not allocate memory required for processing of the mining model, %{modelname/}. Recommend increasing available memory and rerunning the algorithm.
16915 The OLAP Cube-based mining structure or model, %{name/}, cannot be processed with out-of-line bindings (e.g. the INSERT INTO statement or the DTS Pipeline)
16916 Specified MIN_SERIES_VALUE for the mining model, %{modelname/}, was greater than MAX_SERIES_VALUE.
16917 The mining model, %{modelname/}, is already trained.
16918 The '%{column/}' column of the '%{structure/}' OLAP mining structure can only have Content set to non-continuous types (Discretized, Discrete or Key), since it is bound to a discretized source attribute ('%{attribute/}' in the '%{cubedimension/}' cube dimension).
16919 The discretization parameters (DiscretizationMethod and DiscretizationBucketCount) of the '%{column/}' column of the '%{structure/}' OLAP mining structure must match the parameters of the discretized source attribute ('%{attribute/}' in the '%{cubedimension/}' cube dimension).
16920 In mining model, %{modelname/}, the algorithm does not allow a table column as predictable.
16921 The %{model/} mining model has no case key column.
16922 A non-key column in time series model, %{modelname/}, has date/time/timestamp data type. This is not allowed. Recommend modeling the column as numeric.
16923 Too few cases available to train Time Series mining model, %{modelname/}.
16924 The mining structure , %{name/} is already trained and does not support incremental updates. Before using the INSERT INTO statement, use DELETE FROM <object>.
16925 The content type of the '%{column/}' column of the '%{structure/}' mining structure can only be used to classify other columns. However, no classified column reference was found for this column.
16926 The MAXIMUM_CONTINUOUS_INPUT_ATTRIBUTES parameter for the %{modelname/} model is not valid. MAXIMUM_CONTINUOUS_INPUT_ATTRIBUTES must be greater than 0 and less than %d{Max/}.
16927 The '%{Name/}' referenced structure has not been processed.
16928 The '%{model/}' mining model contains features that are not supported in the PMML 2.1 specification.
16929 The '%{column/}' column of the '%{structure/}' OLAP mining structure cannot be bound to the parent attribute in a parent-child dimension ('%{attribute/}' in the '%{cubedimension/}' cube dimension).
16930 The user-defined function (UDF) at line %d{Line/}, column %d{Column/} cannot be used as a data source for the current statement.
16931 Error during IMPORT: The IMPORT command is disabled for local mining models.
16932 The data type specified for the '%{column/}' column of the '%{structure/}' OLAP mining structure is not compatible with its source attribute ('%{attribute/}' in the '%{cubedimension/}' cube dimension).
16933 The ACYCLIC_GRAPH parameter for the %{modelname/} model is not valid. Set it to True or False.
16934 Duplicate Key Sequence values in an input case for %{modelname/}. Ambiguous case(s) may lead to unreliable results. Disambiguate the data (recommended) or increase ErrorLog KeyErrorLimit server parameter.
16935 Multiple Key Time columns were found in mining structure for the '%{modelname/}' time series model. A mining structure containing a time series model can have only one Key Time column.
16936 While using an INSERT INTO statement to train the '%{structure/}' mining structure, the '%{column/}' scalar column was bound to a chapter column in the input rowset.
16937 The source attribute of a non-key OLAP mining structure column must be related to the source attribute of the key column via AttributeRelationships. No direct or indirect relationship exists for the '%{structureCol/}' column of the '%{structure/}' OLAP mining structure.
16938 The DMX statement, INSERT INTO <miningobject>.COLUMN_VALUES, is not supported since the '%{structure/}' mining structure has one or more discretized columns.
16939 The AUTO_DETECT_PERIODICITY parameter for the mining model, %{modelname/}, is not valid. AUTO_DETECT_PERIODICITY should be a number between 0.0 and 1.0
16940 Training set is too small for the mining model, %{modelname/}. The number of training cases should not be less than max(CLUSTER_COUNT,MINIMUM_SUPPORT).
16941 The '%{model/}' mining model has multiple key columns on one level.
17201 Missing
17202 is Missing
17203 Existing
17204 Exists
17205 All
17206 Cluster Model
17207 True
17208 False
17209 =
17210 not =
17211 >
17212 >=
17213 <
17214 <=
17215 and
17216 or
17217 ,
17218 ->
17219 y-intercept
17220 (
17221 )
17222 :
17223 Association Rules Model
17224 Cluster
17225 Transition row for sequence state
17226 Sequence level for cluster
17227 Sequence Clustering Model
17228 Time Series Model
17229 Microsoft Linear Regression
17230 The Microsoft Linear Regression algorithm is a regression algorithm that works well for regression modeling. This algorithm is a particular configuration of the Microsoft Decision Trees algorithm, obtained by disabling splits (the whole regression formula is built in a single root node). The algorithm supports the prediction of continuous attributes.
17231 Microsoft Logistic Regression
17232 The Microsoft Logistic Regression algorithm is a regression algorithm that works well for regression modeling. This algorithm is a particular configuration of the Microsoft Neural Network algorithm, obtained by eliminating the hidden layer. The algorithm supports the prediction of both discrete and continuous attributes.
17401 Memory mapping cannot be created for Performance Monitor counters. The counters will be disabled.
17402 The Performance Monitor counter cannot open the mapped file containing performance data.
17403 Cannot map to the shared memory file containing performance data.
17404 The Performance key of Performance Driver in the registry cannot be opened.
17405 The value of the First Counter registry entry, under the Performance registry entry for the instance, cannot be read.
17406 The value of the First Help registry entry, under the Performance registry entry for the instance, cannot be read.
17407 The value of the Last Counter registry entry, under the Performance registry entry for the instance, cannot be read.
17408 The range for the counters in the registry does not match the expected range of the counters for the instance. Please reload the Performance Monitor initialization file.
17409 An error occurred during initialization: failure from InitializeSecurityDescriptor.
17410 An error occurred during initialization: failure from SetSecurityDescriptorDacl
17411 An error occurred during initialization: failure from OpenProcessToken.
17412 An error occurred during initialization: failure from GetTokenInformation.
17413 An error occurred during initialization: failure from SetSecurityDescriptorOwner.
17414 An error occurred during initialization: failure from SetSecurityDescriptorGroup.
17415 An error occurred during initialization: failure from CreateFileMapping.
17416 An error occurred during initialization: failure from MapViewOfFile.
18201 Either the user, %{strUser/}, does not have access to the %{strDatabase/} database, or the database does not exist.
18202 Either the '%{strUser/}' user does not have permission to alter the '%{strObject/}' object, or the object does not exist.
18203 Either the '%{strUser/}' user does not have permission to access the '%{strObject/}' object, or the object does not exist.
18204 Either the '%{strUser/}' user does not have permission to process the '%{strObject/}' object, or the object does not exist.
18205 Either the '%{strUser/}' user does not have permission to delete the '%{strObject/}' object, or the object does not exist.
18206 Either the '%{strUser/}' user does not have permission to create a new object in '%{strObject/}', or the object does not exist.
18207 Either the '%{strUser/}' user does not have permission to retrieve metadata for the '%{strObject/}' object, or the object does not exist.
18208 Either a permission for the %{strRoleID/} role has already been created for this object, or the object does not exist.
18209 The %{strRoleID/} role referenced by the %{strPermID/} permission does not exist in the %{strDBName/} database.
18210 Either the '%{strUser/}' user does not have permission to restore the '%{strObject/}' database, or the database already exists.
18211 Either the '%{strUser/}' user does not have permission to back up the '%{strObject/}' database, or the database does not exist.
18212 Either the '%{strUser/}' user does not have permission to merge the '%{strObject/}' partition, or the partition does not exist.
18213 An attempt was made to change the RoleID of the %{strPermID/} permission from %{strRoleID/} to %{strNewRoleID/}. The RoleID of a permission cannot be changed after the permission is created.
18214 Either the '%{strUser/}' user does not have permission to subscribe to the '%{strObject/}' trace, or the trace does not exist.
18215 Either the '%{strUser/}' user does not have permission to write back to the '%{strObject/}' object, or the object does not exist.
18216 Either the '%{strUser/}' user does not have permission to synchronize objects on the source or target instance, or the objects do not exist on the source instance.
18217 Either the '%{strUser/}' user does not have permission to retrieve metadata for the '%{strObject/}' object, or the object does not exist.
18218 Either the '%{strUser/}' user does not have permission to drill through the '%{strObject/}' object, or the object does not exist.
18219 Either the user, %{strUser/}, does not have read permission for the database, or the database does not exist.
18220 Either the '%{strUser/}' user does not have permission to write to the '%{strObject/}' object, or the object does not exist.
18221 The '%{strUser/}' user does not have permission to perform a cancel operation.
18222 The '%{strUser/}' user does not have permission to call the Discover method.
18223 Either the '%{strUser/}' user does not have permission to browse the '%{strObject/}' object, or the object does not exist.
18224 This instance does not allow anonymous access.
18225 The requested protection level does not match the instance's required data protection level for administrative operations.
18226 Either the '%{strUser/}' user does not have permission to access the data source of the mining structure '%{strStructure/}', or the data source does not exist.
18227 Session mining structure '%{strStructure/}' cannot be created or processed.
18228 Session mining model '%{strModel/}' cannot be created or processed.
18229 A session mining model must be created in an existing database.
18230 The ImpersonationInfo for datasource '%{Datasource/}' contains an ImpersonationMode that can only be used by a server administrator, .
18231 The datasource in the current set of out-of-line bindings, '%{Datasource/}', contains an ImpersonationMode that cannot be used by an out-of-line datasource.
18232 The datasource , '%{Datasource/}', contains an ImpersonationMode that is not supported for processing operations.
18233 Either the user, '%{strUser/}', does not have permission to clear caches of the '%{strObject/}' object, or the object does not exist.
18234 The current operation is not allowed for a restricted client connection.
18235 Write permission (Allowed) can't be set without Read permission to be set Allowed.
18236 Either the user, '%{strUser/}', does not have permission to lock the '%{strObject/}' object, or the object does not exist.
18237 Only server administrators are allowed to access the server cryptographic key.
18238 Specified EffectiveUserName property %{user/} is not valid user, group, alias or machine account
18239 The '%{attribute/}' attribute in the '%{dimension/}' dimension has a generated dimension security expression that is not valid.
18240 The '%{dimension/}' parent-child dimension has dimension security defined on the key attribute, which is not allowed. You could, alternately, define the equivalent dimension security on the parent attribute.
18241 The requested protection level does not match the server's required data protection level.
18242 The permission required for this operation has not been granted.
18243 The database , '%{Database/}', contains no Impersonation mode or an ImpersonationMode that is not supported for processing operations.
18244 The database , '%{Database/}', contains an ImpersonationMode that is reserved for server administrators.
18245 The UseTransaction and MasterTransaction request properties are reserved for database administrators.
18246 Requested authentication mode is not allowed.
18247 The datasource , '%{Datasource/}', contains an ImpersonationMode that is not supported for XMLA connection operations.
18248 The '%{attribute/}' attribute of the '%{dimension/}' cube dimension has the attribute hierarchy disabled, while having non-trivial dimension security (either of the allowed or denied set are defined), which is not an allowed situation.
18249 The '%{attribute/}' attribute of the '%{dimension/}' database dimension has the attribute hierarchy disabled, while having non-trivial dimension security (either of the allowed or denied set are defined), which is not an allowed situation.
18250 Authentication failed.
18601 Microsoft SQL Server 2005 Pipeline Processing Task
18602 MSMDPP
18603 Partition Processing
18604 Dimension Processing
18605 Data Mining Model Training
18606 Data Mining Model Accuracy
18607 Data Mining Query
18608 Partition Processing
18609 Dimension Processing
18610 Data Mining Model Training
18611 Data Mining Model Accuracy
18612 Data Mining Query
18613 Wrong number of inputs encounted. Only one input is expected.
18614 Connection string to instance is not set.
18615 Object reference is not set.
18616 Data mining query is not set.
18617 Catalog name is not set.
18618 Database ID is not set.
18619 Mining structure ID is not set.
18620 Data mining lift queries are not set.
18621 Data mining lift queries are not saved in the correct format.
18622 Data Mining Accuracy
18623 Data Mining Query
18624 The component does not supply error code descriptions.
18625 The specified input column must contain sorted data.
19000 AnalysisServicesServerInput
19026 The requested operation is not supported by this component.
19027 The data type of the '%{column/}' column is not supported by this component.
19028 This component only supports data mining PREDICTION JOIN queries executed against the target model based on the data in the pipeline rowset.
19201 Functions resource mark.
19202 Converts one or more sets to an array for use in a user-defined function.
19203 Returns the dimension that contains a specified level.
19204 Returns the dimension that contains a specified member.
19205 Returns the dimension that contains a specified hierarchy.
19206 Returns the dimension whose zero-based position within the cube is specified by a numeric expression.
19207 Returns the dimension whose name is specified by a string.
19208 Returns the hierarchy of a specified dimension.
19209 Returns the hierarchy of a specified level.
19210 Returns the level of a member.
19211 Returns the level whose zero-based position in a dimension is specified by a numeric expression.
19212 Returns the level whose name is specified by a string expression.
19213 Returns TRUE if two compared objects are equivalent, FALSE otherwise.
19214 Returns TRUE if a specified member is an ancestor of another specified member, FALSE otherwise.
19215 Returns TRUE if the evaluated expression is the empty cell value, FALSE otherwise.
19216 Returns TRUE if a specified member is in a specified generation, FALSE otherwise.
19217 Returns TRUE if a specified member is a leaf member, FALSE otherwise.
19218 Returns TRUE if a specified member is a sibling of another specified member, FALSE otherwise.
19219 Returns the ancestor of a member at a specified level.
19220 Returns the ancestor of a member at a specific distance away in the hierarchy.
19221 Returns the last sibling among the descendants of a member at a specified level.
19222 Returns the child member with the same relative position under a parent member as the specified child member.
19223 Returns the current member along a dimension during an iteration.
19224 Returns the system-generated data member associated with a nonleaf member.
19225 Returns the default member of a hierarchy.
19226 Returns the default member of a dimension.
19227 Returns the first child of a specified member.
19228 Returns the first child of the parent of a specified member.
19229 Returns a member that excludes values from a specific dimension.
19230 Returns a member from a specified tuple.
19231 Returns the member that is a specified number of positions prior to a specified member along the dimension of the member.
19232 Returns the last child of a specified member.
19233 Returns the last child of the parent of a specified member.
19234 Returns the member that is a specified number of positions following a specified member along the dimension of the member.
19235 Returns the member equivalent to a specified member in a specified hierarchy.
19236 Returns the member whose name is specified by a string expression.
19237 Returns the next member in the level that contains a specified member.
19238 Returns the first sibling among the descendants of a specified level, optionally at a specified member.
19239 Returns a member from a prior period in the same relative position as a specified member.
19240 Returns the parent of a specified member.
19241 Returns the previous member in the level that contains a specified member.
19242 Returns a member from a string expression in MDX format.
19243 Returns a valid measure in a virtual cube by forcing inapplicable dimensions to their top level.
19244 Returns a calculated value using the appropriate aggregate function, based on the aggregation type of the member.
19245 Returns the average value of a numeric expression evaluated over a set.
19246 Returns the current calculation pass of a cube for the specified query context.
19247 Returns the value of a numeric MDX expression evaluated over the specified calculation pass of a cube.
19248 Coalesces an empty cell value to a number.
19249 Returns the correlation of two series evaluated over a set.
19250 Returns the number of tuples in a set, optionally including or excluding empty tuples.
19251 Counts the number of members in the tuple.
19252 Counts the number of tuples in the set.
19253 Counts the number of dimensions in the cube.
19254 Counts the number of levels in the dimension.
19255 Returns the covariance of two series evaluated over a set, using the biased population formula.
19256 Returns the covariance of two series evaluated over a set, using the unbiased population formula.
19257 Returns the number of distinct tuples in a set.
19258 Returns one of two numeric values determined by a logical test.
19259 Calculates the linear regression of a set and returns the value of b in the regression line y = ax + b.
19260 Calculates the linear regression of a set and returns the value of y in the regression line y = ax + b.
19261 Calculates the linear regression of a set and returns R┬▓ (the coefficient of determination).
19262 Calculates the linear regression of a set and returns the value of a in the regression line y = ax + b.
19263 Calculates the linear regression of a set and returns the variance associated with the regression line y = ax + b.
19264 Returns the value of an MDX expression evaluated over another specified cube in the same database.
19265 Returns a value of a string expression evaluated over another specified cube.
19266 Returns the maximum value of a numeric expression evaluated over a set.
19267 Returns the median value of a numeric expression evaluated over a set.
19268 Returns the minimum value of a numeric expression evaluated over a set.
19269 Returns the zero-based ordinal value associated with a specified level.
19270 Returns a value of a numeric expression evaluated over a data mining model.
19271 Returns the one-based rank of a specified tuple in a specified set.
19272 Returns a value generated by rolling up the values of the children of a specified member using the specified unary operator.
19273 Returns the standard deviation of a numeric expression evaluated over a set, using an unbiased population. (Alias for Stdev.)
19274 Returns the standard deviation of a numeric expression evaluated over a set, using a biased population. (Alias for StdevP.)
19275 Returns the standard deviation of a numeric expression evaluated over a set, using an unbiased population.
19276 Returns the standard deviation of a numeric expression evaluated over a set, using a biased population.
19277 Returns a value from a string expression.
19278 Returns the sum of a numeric expression evaluated over a specified set.
19279 Returns the value of a specified member.
19280 Returns the variance of a numeric expression evaluated over a set, using an unbiased population.
19281 Returns the variance of a numeric expression evaluated over a set, using an unbiased population. (Alias for Var function.)
19282 Returns the variance of a numeric expression evaluated over a set, using a biased population. (Alias for VarP function.)
19283 Returns the variance of a numeric expression evaluated over a set, using a biased population.
19284 Executes a void-returning user-defined function.
19285 Returns a set generated by adding calculated members to a specified set.
19286 Returns a set containing all members of the dimension, including calculated members.
19287 Returns a set containing all members of the level, including calculated members.
19288 Returns a set of all ancestors of a member at a specified level.
19289 Returns a set of all ancestors of a member at a specific distance above the member in the hierarchy.
19290 Returns the set of the ascendants of the member.
19291 Returns a set defined in an axis.
19292 Returns a specified number of items from the bottom of a set, optionally sorting the set first.
19293 Sorts a set and returns the specified number of bottommost elements whose cumulative total is at least a specified percentage.
19294 Sorts a set and returns the specified number of bottommost elements whose cumulative total is at least a specified value.
19295 Returns the children of a member.
19296 Returns the cross product of two sets.
19297 Returns the set of descendants of a member at a specified level, optionally including or excluding descendants in other levels.
19298 Returns the set of descendants of a member at a specific distance away in the hierarchy, optionally including or excluding descendants in other levels.
19299 Returns a set, removing duplicate tuples from a specified set.
19300 Drills down the members of a set one level below the lowest level represented in the set, or to one level below a dimension optionally selected by its zero-based index of a member represented in the set.
19301 Drills down the members of a set one level below the lowest level represented in the set, or to one level below an optional level of a member represented in the set.
19302 Drills down the members of a specified count of bottom members of a set, at a specified level, to one level below.
19303 Drills down a specified count of top members of a set, at a specified level, to one level below.
19304 Drills down the members in a specified set that are present in a second specified set.
19305 Drills down the members in a specified set that are present in a second specified set, limiting the result set to a specified number of bottommost members.
19306 Drills down the members in a specified set that are present in a second specified set, limiting the result set to a specified number of topmost members.
19307 Drills up the members of a set that are below a specified level.
19308 Drills up the members in a specified set that are present in a second specified set.
19309 Finds the difference between two sets, optionally retaining duplicates.
19310 Returns a set of tuples from extracted dimension elements.
19311 Returns the set resulting from filtering a set based on a search condition.
19312 Applies a set to each member of another set and joins the resulting sets by union.
19313 Returns the first specified number of elements in a set.
19314 Orders the members of a specified set in a hierarchy in natural or, optionally, post-natural order.
19315 Returns the intersection of two sets, optionally retaining duplicates.
19316 Returns a set of members prior to and including a specified member.
19317 Returns the set of all members in a specified dimension.
19318 Returns the set of all members in a specified hierarchy.
19319 Returns the set of all members at a specified level in a dimension.
19320 Returns a set of members from the Month level in a Time dimension starting with the first period and ending with a specified member.
19321 Returns a set containing a single member based on a string expression containing a member name.
19322 Returns the cross product of two or more sets as a set, excluding empty members.
19323 Arranges the members of a specified set, optionally preserving or breaking the hierarchy.
19324 Returns a set of members (periods) from a specified level starting with the first member and ending with a specified member.
19325 Returns a set of members from the Quarter level in a Time dimension starting with the first period and ending with a specified member.
19326 Returns the set of siblings of a specified member, including the member itself.
19327 Returns a set generated by removing calculated members from a specified set.
19328 Constructs a set from a specified string expression in MDX format.
19329 Returns a subset of members from a specified set.
19330 Returns a subset of members from the end of a specified set.
19331 Toggles the drill state of members.
19332 Returns a specified number of items from the topmost members of a specified set, optionally ordering the set first.
19333 Sorts a set and returns the topmost elements whose cumulative total is at least a specified percentage.
19334 Sorts a set and returns the topmost elements whose cumulative total is at least a specified value.
19335 Returns a set generated by the union of two sets, optionally retaining duplicate members.
19336 Returns a set generated by dynamically totaling child members in a specified set, optionally using a pattern for the name of the parent member in the result set.
19337 Returns a set of members from the Week level in a Time dimension starting with the first period and ending with a specified member.
19338 Returns a set of members from the Year level in a Time dimension starting with the first period and ending with a specified member.
19339 Returns the value of a string MDX expression evaluated over the specified calculation pass of a cube.
19340 Coalesces an empty cell value to a string.
19341 Returns a concatenated string created by evaluating a string expression over a set.
19342 Returns one of two string values determined by a logical test.
19343 Returns a string in Multidimensional Expressions (MDX) format from a member.
19344 Returns the name of a specified dimension.
19345 Returns the name of a specified member.
19346 Returns the name of a specified level.
19347 Returns the name of a specified hierarchy.
19348 Returns a string containing the value of the specified member property.
19349 Constructs a string in MDX format from a set.
19350 Returns a string in MDX format from a specified tuple.
19351 Returns the unique name of a specified hierarchy.
19352 Returns the unique name of a specified dimension.
19353 Returns the unique name of a specified level.
19354 Returns the unique name of a specified member.
19355 Returns the domain name and user name of the current connection.
19356 Returns the current tuple from a set during an iteration.
19357 Returns a tuple from a specified set.
19358 Constructs a tuple from a specified string expression in MDX format.
19359
19360
19361
19362
19363
19364
19365
19366
19367
19368
19369
19370
19371
19372
19373
19374
19375
19376
19377
19378
19379
19380
19381
19382
19383
19384
19385
19386
19387
19388
19389
19390
19391
19392
19393
19394
19395
19396
19397
19398
19399
19400
19401
19402
19403
19404
19405
19406
19407
19408
20601 A notification was received from an instance of SQL Server for the '%{table/}' table.
20602 A notification was received from the datasource '%{datasource/}'.
20801 The SQL Server notification read operation failed. SQL Trace status code: %d{code/}.
20802 The polling notification read operation against the '%{datasource/}' data source failed.
20803 The read operation for the notification polling process against the '%{datasource/}' data source failed, because the result did not contain any columns.
21001 A column number encountered while evaluating the trace definition was not within the range of acceptable values.
21002 An event number encountered while evaluating the trace definition was not within the range of acceptable values.
21003 The file name, %{filename/}, is longer than system limit.
21004 Cannot append to the '%{filename/}' trace file because the file was not properly terminated and may be damaged.
21005 Cannot append to the '%{filename/}' trace file because the file meets, or is larger than, the size limit.
21006 The trace definition has been ended by another process.
21007 A datetime value cannot be converted.
21008 There is a type mismatch in the filter operator (for example, a LIKE operator with an integer column).
21009 The trace filter tree is not valid.
21010 The '%{filename/}' trace definition file is damaged.
21011 The trace has expired (the stop time specified for the trace has passed).
21012 The default session (progress report) trace cannot be subscribed to because the connection is not associated with an existing session..
21013 Permission to create the trace is denied because the user does not have server administrator permissions or permission to view trace events cannot be guaranteed by the trace filter. To guarantee appropriate permissions to view trace events, use a filter to specify an existing database name that the user can administer.
21014 Permission to create a trace is denied. Only members of the server administrator role can create or subscribe to traces without a filter tree.
21015 An audit trace has encountered an error and is stopping the service for the instance.
21016 A filter node has a subtree when none is allowed. Only AND, OR, and NOT filter nodes can have subtrees.
21017 A filter node of type AND or type OR was missing from one or more subtrees. Two are required.
21018 A filter node of type NOT must have exactly one subtree.
21019 A filter node has been created with a type that is not valid.
21020 A filter node of type AND, OR, or NOT contains a column ID. These types cannot contain column IDs.
21021 A filter node of type AND, OR, or NOT contains a value. These types cannot contain values.
21022 A filter node contains a '%{column/}' column that is not present in the trace, and is not derived from the SPID.
21023 A filter node of type LIKE must have a string value.
21024 A filter node of type LIKE cannot have a string value that is longer than 10,000 characters.
21025 A string matching error occurred while evaluating the LIKE filter expression for the trace.
21026 The trace was cancelled by a delete operation.
21027 A filter node of type AND or type OR requires two operands.
21028 The value supplied for the log file size is not valid.
21029 A column with invalid type structure was encountered when the trace definition was being parsed.
21030 The system trace %{tracename/}, cannot be created or altered through the client request.
21031 Object specified in a client request is not a trace object. Client can subscribe only to trace objects.
21402 Operation completed with %d{Count/} problems logged.
21801 The operation has been cancelled because the administrator has stopped the instance.
21802 The operation has been cancelled.
21803 The operation was cancelled because an audit trace failure stopped the instance.
21804 The operation was cancelled because the session was cancelled.
22601 The lock operation timed out.
22602 \n While attempting to acquire one or more locks, the transaction was canceled. \n
22603 An attempt was made to unlock an object that is already unlocked.
22604 The specified lock manager object does not exist.
22605 The lock operation ended unsuccessfully because of deadlock.
22606 The specified lock ID already exists.
22607 The request requires an active transaction.
22608 The lock operation failed due to too many changes on the object.
23201 Backup started.
23202 Backup finished.
23203 Backup failed.
23204 Restore started.
23205 Restore finished.
23206 Restore failed.
23207 Synchronization started.
23208 Synchronization finished.
23209 Synchronization failed.
23601 Object specified in a client request is not a database object. Client can synchronize only database object.
23602 Object specified in a client request is not a database object. Client can backup only database object.
23603 The '%{objectname/}' object cannot be restored because the object already exists. Set the AllowOverwrite setting to True to overwrite the object.
23604 The '%{filename/}' backup file already exists. Provide a different file name, delete the existing backup file, or set the AllowOverwrite setting to True, then repeat the operation.
23605 The metadata object with ID of '%{objectid/}', Name of '%{objectname/}' cannot be backed up.
23606 The object with ID of '%{objectid/}', Name of '%{objectname/}' was not found in the backup file and cannot be restored.
23607 Error during Restore/Synchronize: The backup metadata is damaged, so the operation cannot locate or process node %{node/}.
23608 An object with the '%{objectname/}' name already exists on the instance. (The AllowOverwrite flag only applies to the '%{objectid/}' object ID, not to the object name.)
23609 Error during synchronization: Cannot synchronize objects on the same instance.
23610 Error during synchronization: Cannot synchronize objects on instances with different file storage mode settings, such as binary XML and compression settings.
23611 The database was not restored because the password used in the Restore command was incorrect or the backup file was damaged. Ensure that backup file is not damaged, then attempt to restore the database again using the correct password.
23612 Error during Restore/Synchronization: the backup metadata is damaged, so the operation cannot locate or process the '%{node/}' node from the '%{file/}' backup file.
23613 Error during backup: There is insufficient free disk space on the '%{drive/}' drive to create the backup file.
23614 Error during restoration: The Restore command is disabled for offline cubes.
23615 Error during synchronization: The Synchronize command is disabled for local cubes.
23616 Error during synchronization: The Synchronize command failed while synchronizing empty file list (first stage is missing).
23617 Error during synchronization: The Synchronize command is attempting to repeat the first stage.
23618 Error during synchronization: Client is trying to access the '%{file/}' file that is not included in the synchronization file list.
23619 An unexpected command or node was encountered during synchronization.
23620 An error occurred while synchronizing the '%{Database/}' database.
23621 An error occurred while synchronizing the '%{Database/}' database: Source and destination instances should have the same value for the SupportEncryptedConnectionString property.
23622 \n Error occurred during \n Restore/Synchronization: Instance versions used are incompatible. \n
23623 Backup file extension can be only .ABF.
23624 Error during Syncronize: the synchronization LOG metadata is damaged, can't locate and/or process node %{node/}, file %{file/}.
23625 Restored/synchronized database %{database/} should already exist on target machine and must contain master datasource pointing to a master database.
23626 Both: restored (or synchronized) and new databases must have the same master datasourceId.
23627 DatasourceId %{datasourceid/} specified in Synchronize command doesn't exist in synced databasource. Specify correct datasource and repeat the command.
23628 An error occurred while restoring the '%{Database/}' database: backup file was created on a server with different value for the SupportEncryptedConnectionString property.
23629 Restore under different DatabaseId/DatabaseName can not be done for a database with remote partitions.
23630 Restore command may contain DatabaseId only together with DatabaseName.
23631 Restore failed. Backup file was created on a server with EnableBinaryXML=%d{BLSet/} and current server is running with EnableBinaryXML=%d{CSSet/}.
23632 Restore failed. Backup file was created on a server with EnableCompression=%d{BLSet/} and current server is running with EnableCompression=%d{CSSet/}.
23633 Synchronization failed. Synchorization from the server with EnableBinaryXML=%d{BLSet/} and current server is running with EnableBinaryXML=%d{CSSet/}.
23634 Synchronization failed. Synchorization from the server with EnableCompression=%d{BLSet/} and current server is running with EnableCompression=%d{CSSet/}.
23635 Restore failed. Backup file was created on a server with ConnStringEncryptionEnabled=%d{BLSet/} and current server is running with ConnStringEncryptionEnabled=%d{CSSet/}.
23636 Synchronization failed. Synchronization from the server with ConnStringEncryptionEnabled=%d{BLSet/} and current server is running with ConnStringEncryptionEnabled=%d{CSSet/}.
23637 An object with the same '%{objectId/}' ID but different '%{objectname/}' Name already exists on the instance. (The AllowOverwrite flag only applies to the object ID, not to the object name.)
23638 Neither Backup/Restore nor Synchronize command can be invoked in a user initiated transaction.
23639 Restore under different DatabaseId/DatabaseName can not be done for a database with partitions with specific location.
23640 Restore command Location subtree used for restoring of remote partition incomplete: it must contain non-empty DataSourceId, DatasourceType=Remote and File altogether. Elements Folders and ConnectionString are optional.
23641 Restore command Location subtree used for updating of DS connection strings incomplete: it must contain non-empty DataSourceId, DatasourceType=Local and ConnectionString altogether. Elements File and Folders are not allowed.
23642 Restore command Location subtree used to specify folder location mapping must contain at least one non-empty Folder element.Elements File, DatasourceType, DataSourceId and ConnectionString are not allowed.
23643 Restore command allows to specify only one Location element for all local folder location mapping.
23644 Synchronize command Location subtree used for restoring of remote partition incomplete: it must contain non-empty DataSourceId, DatasourceType=Remote and ConnectionString altogether. Element Folders is optional. Element File is not allowed.
23645 Synchronize command Location subtree used for updating of DS connection strings incomplete: it must contain non-empty DataSourceId, DatasourceType=Local and ConnectionString altogether. Elements File and Folders are not allowed.
23646 Synchronize command Location subtree used to specify folder location mapping must contain at least one non-empty Folder element. Elements File, DatasourceType, DataSourceId and ConnectionString are not allowed.
23649 Synchronize command allows to specify only one Location element for all local folder location mapping.
24201 The attribute key cannot be found: %1[Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%]%[; Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%].
24202 The attribute key is a duplicate: %1[Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%]%[; Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%].
24203 A null attribute key was converted to an unknown member: %1[Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%]%[; Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%].
24204 Started reading data from the '%{strName/}' partition.
24205 Finished reading data from the '%{strName/}' partition.
24206 Started reading data from the '%{strName/}' aggregation.
24207 Finished reading data from the '%{strName/}' aggregation.
24208 Started reading data from the '%{strName/}' direct writeback partition.
24209 Finished reading data from the '%{strName/}' direct writeback partition.
24210 Started processing the '%{strName/}' dimension.
24211 Finished processing the '%{strName/}' dimension.
24212 Started reading data from the '%{strName/}' attribute.
24213 Finished reading data from the '%{strName/}' attribute.
24214 Started discretizing of the '%{strName/}' attribute.
24215 Finished discretizing of the '%{strName/}' attribute.
24216 Grouping of the '%{strName/}' attribute has started..
24217 Finished grouping the '%{strName/}' attribute.
24218 Started reading data for the '%{strName/}' attribute.
24219 Finished writing data for the '%{strName/}' attribute.
24220 Building indexes for the '%{strName/}' attribute has started.
24221 Finished building indexes for the '%{strName/}' attribute.
24222 Started processing the '%{strName/}' hierarchy.
24223 Finished processing the '%{strName/}' hierarchy.
24224 Starting to build decode stores for the '%{strName/}' hierarchy.
24225 Finished building decode stores for the '%{strName/}' hierarchy.
24226 Building the lookup store for the '%{strName/}' data mining dimension has started.
24227 Finished building lookup store for the '%{strName/}' data mining dimension.
24228 Construction of the record group '%{Group/}' for the '%{strName/}' attribute has started.
24229 Finished grouping records %{Group/} for the '%{strName/}' attribute.
24230 Processing of the '%{strName/}' mining structure has started.
24231 Finished processing the '%{strName/}' mining structure.
24232 Processing of the '%{strName/}' cube has started..
24233 Finished processing the '%{strName/}' cube.
24234 Processing of the '%{strName/}' measure group has started.
24235 Finished processing the '%{strName/}' measure group.
24236 Processing of the '%{strName/}' model has started.
24237 Finished processing the '%{strName/}' model.
24238 Processing of the '%{strName/}' partition has started.
24239 Finished processing the '%{strName/}' partition.
24240 Processing of the '%{strName/}' group partition has started.
24241 Finished processing the '%{strName/}' group partition.
24242 Starting to group records '%{Group/}' for the '%{strName/}' partition.
24243 Finished grouping records %{Group/} for the '%{strName/}' partition.
24244 Starting to write data of the '%{strName/}' partition.
24245 Finished writing data for the '%{strName/}' partition.
24246 Building the aggregations and indexes for the '%{strName/}' partition has started.
24247 Finished building aggregations and indexes for the '%{strName/}' partition.
24248 The query of the '%{strName/}' measure group has started. \n
24249 Finished querying the '%{strName/}' measure group.
24250 Reading the linked data of the '%{strName/}' measure group has started.
24251 Finished reading linked data of the '%{strName/}' measure group.
24252 Reading the linked data of the '%{strName/}' partition has started.
24253 Finished reading linked data of the '%{strName/}' partition.
24254 The job completed successfully.
24255 The job completed with failure.
24256 The operation has been launched.
24257 Processing of the '%{strName/}' attribute has started.
24258 Finished processing the '%{strName/}' attribute.
24259 Indexing aggregations of the '%{strName/}' partition has started.
24260 Finished indexing aggregations of the '%{strName/}' partition.
24261 Building indexes for the '%{strName/}' partition has started.
24262 Finished building indexes for the '%{strName/}' partition.
24263 Building aggregations for the '%{strName/}' partition has started.
24264 Finished building aggregations for the '%{strName/}' partition.
24265 Merging aggregations for the '%{strName/}' partition has started.
24266 Finished merging aggregations for the '%{strName/}' partition.
24267 Processing of the '%{strName/}' database has started.
24268 Finished processing the '%{strName/}' database.
24269 Started building processing schedule.
24270 Finished building processing schedule.
24271 There were errors generated during the calculation of the CACHE statements. Query processing will continue without calculating the CACHE statements. The failure occurred for the following reason(s): '%{errors/}'.
24272 The number of buckets found by the discretization method is not same as the number of buckets requested by the attribute with ID of %{PropertyId/}, Name of %{PropertyName/}.
24401 The attribute key cannot be found: %1[Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%]%[; Table: %{Table/}, Column: %{Column/}, Value: %{Value/}%].
24402 The attribute key was converted to an unknown member because the attribute key was not found. Attribute %{Property/} of Dimension: %{Dimension/} from Database: %{Database/}, %1[Cube: %{Cube/}, Measure Group: %{Detail/}, Partition: %{Partition/}, %]Record: %ld{Record/}.
24403 The record was skipped because the attribute key was not found. Attribute: %{Property/} of Dimension: %{Dimension/} from Database: %{Database/}, %1[Cube: %{Cube/}, Measure Group: %{Detail/}, Partition: %{Partition/}, %]Record: %ld{Record/}.
24404 The record was skipped because the attribute key is a duplicate. Attribute: %{Property/} of Dimension: %{Dimension/} from Database: %{Database/}, %1[Cube: %{Cube/}, Measure Group: %{Detail/}, Partition: %{Partition/}, %]Record: %ld{Record/}.
24405 A null attribute key was converted to an unknown member. Attribute: %{Property/} of Dimension: %{Dimension/} from Database: %{Database/}, %1[Cube: %{Cube/}, Measure Group: %{Detail/}, Partition: %{Partition/}, %]Record: %ld{Record/}.
24406 The record was skipped because a null attribute key was encountered. Attribute: %{Property/} of Dimension: %{Dimension/} from Database: %{Database/}, %1[Cube: %{Cube/}, Measure Group: %{Detail/}, Partition: %{Partition/}, %]Record: %ld{Record/}.
24407 Errors were encountered while calculating CACHE statements included in the script. Query processing will continue without calculating CACHE statements that contain errors.
24601 The %{dimension/} dimension cannot be updated because it has not been processed.
24602 A loop involving the member with the key %1[%{key/}%]%[, %{key/}%], was detected in the parent-child relationship between the '%{property/}' attribute and the '%{relatedproperty/}' attribute.
24603 Rigid relationships between attributes cannot be changed during incremental processing of a dimension.
24604 The '%{dimension/}' data mining dimension cannot be processed because the '%{miningmodel/}' mining model on which the dimension is based must be processed first.
24605 An unexpected null value was encountered for the following measure during processing: '%{Measure/}' of Measure Group: '%{Detail/}' from Database: '%{Database/}', Cube: '%{Cube/}' in Table: '%{Table/}', Column: '%{Column/}'.
24606 The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
24607 The version of the linked %{typename/}, with the name of '%{name/}', on the remote instance has changed. Repeat the operation to resolve the issue. \n
24608 The version of the linked %{typename/} with the ID of '%{id/}' ID, Name of '%{name/}' on the remote instance has changed. Repeat the operation to resolve the issue.
24609 The version of the linked %{typename/}, with the ID of '%{id/}', Name of '%{name/}' on the remote server has changed. Repeat the operation to resolve the issue.
24610 The version of the linked %{typename/}, with the ID of '%{id/}', Name of '%{name/}' on the remote server has changed. Repeat the operation to resolve the issue.
24611 The version of the linked %{typename/}, with the ID of '%{id/}', Name of '%{name/}' on the remote server has changed. Repeat the operation to resolve the issue.
24612 An error occurred while the %{typename/}, with the ID of '%{id/}', Name of '%{name/}' was being processed.
24613 An error occurred while the '%{Property/}' attribute of the '%{Dimension/}' dimension from the '%{Database/}' database was being processed.
24614 An error occurred while processing the '%{Partition/}' partition of the '%{Detail/}' measure group for the '%{Cube/}' cube from the %{Database/} database.
24615 The metadata for the statically linked %{typename/}, with the name of '%{name/}', cannot be verified against the source object.
24616 An error occurred while the '%{Property/}' attribute was being discretized.
24617 The '%{Property/}' attribute cannot be discretized into the requested number of buckets because there are too few distinct values.
24618 The attribute with ID of '%{PropertyId/}', Name of '%{PropertyName/}' cannot be discretized because there are too few distinct values.
24619 Either you do not have permission to access the specified member, or the specified member does not exist.
24620 The source measure group of the '%{detail/}' linked measure group cannot be found.
24621 An error occurred while processing the indexes for the %{Partition/} partition of the %{Detail/} measure group of the %{Cube/} cube from the %{Database/} database.
24622 The source %{typename/} with the ID of '%{id/}', Name of '%{name/}' cannot be queried because it is not processed.
24623 The sort order specified for distinct count records is incorrect.
24624 The slice specified for the %{Property/} attribute is incorrect.
24625 The '%{Property/}' discretized attribute cannot be bound to multiple keys.
24626 The '%{measurename/}' measure name was not found when resolving the binding for the '%{property/}' attribute.
24627 The '%{agg/}' user-defined aggregation in the '%{partition/}' partition does not have a valid binding associated to the source object.
24628 The '%{dim/}' dimension is not valid for the '%{agg/}' aggregation.
24629 The '%{cubedimid/}' dimension bound to the '%{cubename/}' cube is not valid or does not exist.
24630 Attribute '%{attribute/}' in dimension '%{dimension/}' has a binding to a remote dimension which is no longer valid.
24631 The binding of the measure group '%{measuregroupid/}' references a server measure group '%{remotemgid/}' that does not exist.
24632 The binding to measure ID '%{measureid/}' in measure group '%{measuregroup/}' was not found in the source measure group.
24633 The remote data source for the '%{object/}' object is not valid.
24634 The '%{cubedimid/}' dimension was not found in the '%{cubename/}' source cube.
24635 The '%{measuregroupid/}' measure group was not found in the '%{cubename/}' source cube.
24636 The '%{attribute/}' attribute in the '%{dimension/}' dimension has an binding to a remote dimension that is not valid.
24637 Only databases of type BLS can be used for workbook data sources.
24638 Attributes in a workbook dimension can only have workbook attribute bindings.
24639 The data type of a key for the '%{member/}' grouping member is incorrect.
24640 The '%{member/}' grouping member could not be found.
24641 The '%{database/}' database was not found when resolving the binding for the '%{property/}' property.
24642 The '%{cube/}' cube was not found when resolving the binding for the '%{property/}' property.
24643 The '%{dim/}' dimension was not found when resolving the binding for the '%{property/}' property.
24644 The '%{attr/}' attribute was not found when resolving the binding for the '%{property/}' property.
24645 The '%{hier/}' hierarchy was not found when resolving the binding for the '%{property/}' property.
24646 The '%{level/}' level was not found when resolving the binding for the '%{property/}' property.
24647 The '%{attr/}' attribute has more than the maximum number of supported translations.
24648 The '%{attr/}' attribute has no key columns.
24649 The '%{measuregroup/}' measure group was not found when resolving the binding for the '%{property/}' property.
24650 The '%{measure/}' measure was not found when resolving the binding for the '%{property/}' property.
24651 Either an incorrect number of filter values or mismatched filter values were encountered while building the ROLAP condition.
24652 The source measure group specified for the '%{detail/}' linked measure group cannot both belong to the same cube.
24653 An error was encountered while resolving the key for the member with key %['%{key/}' ]in attribute '%{property/}'.
24654 An error was encountered while resolving the name for the '%{name/}' member in the '%{property/}' attribute.
24655 Maximum number of ROLAP rows to process in one query has been exceeded.
24656 Execution limit reached
24657 The restrictions imposed on partition slice where violated.
24658 An error was encountered while processing the Parent/Child Dimension '%{dim/}'.
24659 The default member specified for the '%{Dimension/}' dimension in '%{Detail/}' measure group is incorrect.
24660 The '%{DimensionName/}' dimension is remote linked, so no queries can be allowed.
24661 The cube attribute can not be found for a cube attribute permission object with ID of '%{CubeAttrPermID/}'.
24662 User-defined group member '%{GroupMember/}' could not be resolved in '%{Dimension/}' dimension.
24663 User-defined grouping attribute '%{GroupAttr/}' can not be found in '%{Dimension/}' dimension attributes.
24664 User-defined grouping attributes are only supported with session-scope dimensions.
24665 User-defined grouping members can only be specified when the grouping type is set to be user-defined.
24666 Attribute binding for property '%{property_name/}' is invalid because the parent dimension has a non-OLAP binding.
24667 Cube attribute binding for property '%{property_name/}' is invalid because the parent dimension has a different source cube.
24668 Cube attribute binding for property '%{property_name/}' is invalid because the parent dimension has a different source cube dimension.
24669 The '%{agg/}' aggregation in the '%{partition/}' partition does not have a valid binding associated to the source object.
24670 Invalid source for aggregation measure '%{agg_measure/}' of aggregation '%{agg/}'.
24671 The workbook cache file '%{workbook_connstr/}' could not be found in the workbook manager.
24672 The workbook specified by DatabaseId='%{database_id/}' already opened.
24673 The workbook specified by DatabaseId='%{database_id/}' not opened.
24674 Element Parallel is not supported in non-transactional batch.
24675 Only Process nodes are allowed under node Parallel in a batch command.
24676 Object specified in a client request is not a datasource. Only Datasource objects are allowed for this command.
24677 The linked %{typename/} with the ID of '%{id/}', Name of '%{name/}' cannot be processed because its source object is not processed.
24678 The linked %{typename/} with the ID of '%{id/}', Name of '%{name/}' cannot be processed because it contains MG dimension with the ID of '%{mgdim_id/}', Name of '%{mgdim_name/}' with different granularity attribute than its source object.
25201 Microsoft SQL Server 2005 Analysis Services Managed Code Module
27601 The '%{column/}' column is a measure and cannot be included in a GROUP BY clause.
27602 The '%{column/}' measure column cannot be aggregated because there is no GROUP BY clause.
27603 The '%{column/}' column is a measure and must be aggregated in a GROUP BY clause.
27604 The '%{measure/}' measure cannot be aggregated with the Sum function.
27605 The '%{measure/}' measure cannot be aggregated with the Avg function.
27606 The '%{measure/}' measure cannot be aggregated with the Count function.
27607 The '%{measure/}' measure cannot be aggregated with the Min function.
27608 The '%{measure/}' measure cannot be aggregated with the Max function.
27609 The '%{column/}' column is an attribute and cannot be aggregated. It must be included in the GROUP BY clause.
27610 Drillthrough can only return columns from one measure group.
27611 The SQL query cannot be executed unless a catalog is specified.
27612 The '%{schema/}' schema is not valid in the SQL query.
27613 The '%{table/}' table in the FROM clause of the SQL query is not qualified by the schema (or cube) name.
27614 The '%{cube/}' schema (or cube) either does not exist in the '%{database/}' database or the user does not have the necessary permissions to access it.
27615 All tables that are specified in a SQL query must come from the same schema (or cube).
27616 The '%{table/}' table is included multiple times in the FROM clause.
27617 The '%{table/}' table either does not exist in the '%{cube/}' schema (or cube.), or the user does not have the necessary permissions to access it.
27618 The WHERE clause contains an expression that is not valid.
27619 An unsupported binary operation is specified in the WHERE clause.
27620 A GROUP BY clause cannot be used on the '%{column/}' column because the column is based on a measure.
27621 A GROUP BY clause cannot be used on the '%{column/}' column because the column is not specified in the SELECT clause.
27622 An ORDER BY clause cannot be used without a GROUP BY clause.
27623 An ORDER BY clause cannot be used if SQLQueryMode is set to Data.
27624 An ORDER BY clause cannot be used on the '%{column/}' column because the column is not specified in the SELECT clause.
27625 Multiple ORDER BY conditions are not supported.
27626 An error has been encountered with the '%{column/}' column. The ORDER BY clause is supported only on UniqueName and Name attributes.
27627 SQL queries with OR clauses are not supported.
27628 A GROUP BY clause cannot be used to query dimension tables if SQLQueryMode is set to Data.
27629 The column contains an expression that is not valid.
27630 The Index parameter of the Key function is not a valid data type.
27631 The '%{function/}' function cannot be applied on the '%{column/}' column.
27632 The '%{schema/}' schema name for the '%{column/}' column does not match the schema of the tables in the FROM clause.
27633 The '%{table/}' table for the '%{column/}' column is not present in the FROM clause.
27634 The '%{column/}' column is not qualified. A qualified column name is required if multiple tables are specified in the FROM clause.
27635 A badly formed schema, table, or column name was encountered.
27636 The '%{column/}' column cannot be found in the '%{table/}' table.
27637 There is an unexpected operator in the WHERE clause. Only the Equals operator ( = ) is supported.
27638 There is an unexpected operator in the WHERE clause. Only the Equal To operator ( = ) is supported.
27639 The '%{column/}' column is a measure and cannot be used in the WHERE clause.
27640 A function that is not valid was applied to the '%{column/}' column in the WHERE clause.
27641 The '%{member/}' member specified in the WHERE clause cannot be located in the '%{hierarchy/}' hierarchy.
27642 The result format specified for the SQL query was not valid. Only Tabular and Native result formats are supported.
27643 SQL queries with subqueries are not supported.
27644 SQL queries with TOP or BOTTOM operations are not supported.
27645 SQL queries support only one MDXFilter function call in the WHERE clause.
27646 SQL queries does not allow conditions when the MDXFilter function is present in the WHERE clause.
27647 The '%{member/}' member specified in the WHERE clause does not belong to the expected level within the '%{hierarchy/}' hierarchy.
27648 The attribute '%{attrName/}' in the dimension '%{dimName/}' is outside the granularity of the measure group '%{mgName/}' and cannot be returned as a column.
27649 Drillthrough columns must belong to exactly one measure group. The columns requested by the drillthrough statement are referencing multiple measure groups.
27650 The '%{column/}' column in the '%{table/}' table does not have a key column at offset %{offset/}.
28201 The ScalarPredict function returns the most likely value for the specified column.
28202 The TablePredict function returns the most likely set of values for the specified column.
28203 The PredictAssociation function returns a set of rows that are associated with the input case.
28204 The PredictSequence function returns a sequence of events that is n steps long (one if not specified) based on the input case.
28205 The PredictTimeSeries function returns the next n steps of the time series (one if not specified).
28206 The PredictSupport function returns the support value for either the most likely value or the specified value.
28207 The PredictVariance function returns the variance value of the specified column.
28208 The PredictStdev function returns the standard deviation value of the specified column.
28209 The PredictProbablility function returns the probability value for either the most likely or specified value.
28210 The PredictAdjustedProbability function returns the adjusted probability value for either the most likely or specified value.
28211 The Cluster function returns the most likely cluster identifier for the input case.
28212 The ClusterDistance function returns the distance of the input case from the specified (or most likely) cluster.
28213 The ClusterProbability function returns the probability of the input case belonging to the specified (or most likely) cluster.
28214 The PredictHistogram function returns a table that contains the statistics for all states of a predictable column. The table contains the following columns: the specified column, $Support, $Probability, $ProbabilityVariance, $ProbabilityStdev, $Variance, and $Stdev.
28215 The PredictHistogram function returns a table that contains the statistics for cluster membership of the input case. The table contains the following columns: the specified column, $Support, $Probability, $ProbabilityVariance, $ProbabilityStdev, $Variance, $Stdev, $Cluster, and $Distance.
28216 The TopCount function returns the first n-item rows of the table expression, ordered in descending order by the rank expression.
28217 The BottomCount function returns the last n-item rows of the table expression, ordered in ascending order by the rank expression.
28218 The TopSum function returns the smallest number of rows in descending order such that the sum of the rank expression values is as least the sum specified.
28219 The BottomSum function returns the smallest number of rows in increasing order such that the sum of the rank expression values is at least the sum specified.
28220 The TopPercent function returns the smallest number of rows in descending order such that the sum of the rank expression values is at least the specified percentage of the total sum of rank expression values.
28221 The BottomPercent function returns the smallest number of rows in increasing order such that the sum of the rank expression values is at least the specified percentage of the total sum of rank expression values.
28222 The RangeMid function returns either the midpoint of a continuous column or the specified bucket of a discretized column.
28223 The RangeMin function returns either the lower bound of a continuous column or the specified bucket of a discretized column.
28224 The RangeMax function returns either the upper bound of a continuous column or the specified bucket of a discretized column.
28225 The PredictNodeId function returns a node ID that the algorithm uses in performing a prediction.
28226 The IsInNode function returns a value of true if the input case is considered in the specified node.
28227 The IsDecendent function returns a value of true if the input case is considered to be a descendent of the specified node.
28228 $Cluster is a selectable column from PredictHistogram for clusters.
28229 $Probability is a selectable column from PredictHistogram or Predict(...,INCLUDE_STATISTICS).
28230 $AdjustedProbability is a selectable column from PredictHistogram or Predict(...,INCLUDE_STATISTICS).
28231 $Stdev is a selectable column from PredictHistogram or Predict(...,INCLUDE_STATISTICS).
28232 $Support is a selectable column from PredictHistogram or Predict(...,INCLUDE_STATISTICS).
28233 $Variance is a selectable column from PredictHistogram or Predict(...,INCLUDE_STATISTICS).
28234 $NodeId is a selectable column from PredictHistogram or Predict(...,INCLUDE_STATISTICS).
28235 $Sequence is a selectable column from PredictSequence.
28236 $Time is a selectable column from PredictTimeSeries.
28237 $Distance is a selectable column from PredictHistogram for clusters.
28238 The Lag function returns the time lag of the case in the mining model.
28239 The PredictCaseLikelihood function returns the likelihood of the case in the mining model.
29100 The '%{strDimID/}' dimension does not contain the '%{strAttrID/}' attribute.
29101 The '%{strAttrID/}' attribute was specified more than once in the writeback operation.
29102 %d{cKeys/} keys have been specified for the '%{strAttrID/}' attribute. %d{cKeyCount/} keys are required.
29103 No attribute could be found for the key values specified for the '%{strAttrID/}' attribute ID.
29104 A name for the '%{strAttrID/}' attribute ID was not specified. Attribute names must always be specified for new attributes.
29105 The attribute cannot be inserted because the dimension already contains a member with the same keys as the ones specified for the '%{strAttrID/}' attribute ID.
29106 The '%{strAttrID/}' attribute is not a related attribute of the '%{strParentAttrID/}' attribute.
29107 A definition for the '%{strAttrID/}' attribute is missing, although the attribute is specified as a new related attribute of the '%{strParentAttrID/}' attribute. Ensure that the key points to an existing attribute or add a definition for the new attribute.
29108 The '%{strLang/}' language has been specified more than once for the attribute with ID of '%{strAttrID/}', Name of '%{strAttrName/}'.
29109 The '%{strLang/}' language cannot be found in the list of translations defined for the '%{strAttrID/}' attribute. Check the spelling of the language name or the attribute definition in the dimension.
29110 A recursive update operation cannot be performed on the '%{strAttrID/}' attribute because it is not part of a parent-child relationship. Recursive updates can be performed only on attributes that have a related attribute whose Usage property is set to Parent.
29111 The '%{level/}' level is not a parent-child level. Dimension writeback using this syntax is supported only on parent-child members.
29112 The dimension writeback statement contains syntax that is not valid. The last component of a new member definition must be the name, not the key of the '%{member/}' member.
29113 '%{property/}' is not a member property of the '%{level/}' level.
29114 The '%{property/}' attribute has a composite key and cannot be updated using this writeback syntax.
29115 The contents of the attribute with Id of '%{attributeId/}', Name of '%{attributeName/}' cannot be updated because the dimension already contains a member with the same key and the attribute is not the deepest conditional attribute in the request.
29116 Custom rollup was specified for the '%{attr/}' attribute but no binding exists for it.
29117 Custom rollup properties were specified for the '%{attr/}' attribute but no binding exists for it.
29118 A MemberValue column was specified for the '%{attr/}' attribute, but no binding exists for it.
29119 A value was specified for the SkippedLevels property of of a member, but no binding was specified for the SkippedLevels property of the '%{attr/}' attribute which contains that member.
29120 Multiple conditions were specified for the '%{attr/}' parent attribute. Only one condition can be specified for parent attributes.
29121 The MoveToRoot property cannot be set to True for this dimension writeback operation, because only parent attributes can be moved to the root.
29122 The IsRoot property cannot be set to True for this dimension writeback operation, because only parent attributes can be inserted in the root.
29123 The member '%{member/}' is calculated and therefore cannot be used in a dimension writeback operation.
29501 The compression library cannot be initialized.
29502 The data could not be decompressed.
29701 The file is not encrypted.
29702 Failed to decrypt sensitive data. Possibly the encryption key does not match or is inaccessible because of improper service account change. Some server functionality will be inaccesible.
29703 Failed to encrypt sensitive data. Possibly the encryption key is inaccessible because of improper service account change. Some server functionality will be inaccesible.
29902 The file %{file/} is encrypted. You must provide a password.
29903 The CryptAcquireContext function with the specified provider name failed: %{External/}
29904 Failed to create a hash object or to hash the password.
29905 Failed to get or set hash key parameters.
29906 Failed to decrypt sensitive data. Possibly the encryption key does not match or is inaccessible because of improper service account change.
29907 Failed to encrypt sensitive data. Possibly the encryption key is inaccessible because of improper service account change.
29908 Invalid cryptographic key.
30007 Internal.
30301 Multiple-record DIME payloads are not supported.
30302 A damaged DIME header has been encountered. The connection will be closed.
30303 The ID field of a chunk record for a DIME message is not set to null.
30304 An unexpected value was encountered in the TYPE field of a chunk record for a DIME message.
30305 The beginning of a DIME message was expected.
30306 An unexpected beginning of a DIME message was encountered.
30701 A chapter column was unexpectedly encountered in a forward-only rowset.
30702 Internal error: A forward-only rowset does not support certain operations, such as Current, Next, and Move.
30703 A chapter column was unexpectedly encountered in a multiple-reader rowset.
30704 Internal error: The multiple-reader rowset does not support certain operations, such as Current, Next, and Move.
30705 Internal error: The multiple-reader rowset does not support the creation of a time dimension.
30706 Internal error: The multiple-reader rowset does not support the insertion of new rows.
30707 The '%{columnname/}' column does not exist in the pipeline rowset.
30901 VBA Expression Services returned the following error: %{External/}.
30902 VBA Expression Services cannot be initialized.
30903 The %{func/} function is not supported by VBA Expression Services.
31000 A timeout occurred while waiting for a synchronization object.
31001 The requested object was not found.
31002 The output buffer is too small. Increase the size of the output buffer and repeat the operation.
31003 The input buffer is not yet available.
31750 An unexpected error occurred (file '%{file/}', line %{line/}, function '%{func/}').
31751 The parameter is not valid.
31752 The requested object was not found.
31753 An external component returned an error (HRESULT = %{External/}).
31754 An attempt was made to insert a duplicate element. Duplicates are not allowed.
31755 Failed to generate a hash string.
31756 The string comparison operation failed.
31757 The operation terminated unsuccessfully.
31758 An internal buffer, used for file names, is too small.
31760 The current directory cannot be retrieved.
31761 The following internal error occurred: the message format is not valid.
31762 An undefined error has occurred.
31766 The %{feature_name/} feature is not implemented for this release.
31767 Chapter columns (nested table columns) are not supported.
31768 Error occurred during error handling.
31769 The following error occurred: the object context was not set.
31770 Interface not implemented.
31771 A premature failure occurred due to failure simulation.
31772 An unexpected exception occured.
32222 The '%{localeid/}' locale is not supported.
32223 The '%{localeid/}' locale for UI is not supported.
32600 The following system error occurred: %1[ %{External/}%]%[, %{External/}%].
32601 The following error occurred while loading an external library '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
32602 The following error occurred while unloading an external library: %1[ %{External/}%]%[, %{External/}%].
32603 The following system error occurred during a call to GetFileSize for file: '%{Note1/}'%1[: %{External/}%]%[, %{External/}%].
32604 The following system error occurred from a call to CreateEvent: %1[ %{External/}%]%[, %{External/}%].
32605 The following system error occurred from a call to CloseHandle: %1[ %{External/}%]%[, %{External/}%].
32606 The following system error occurred from a call to GetOverlappedResult for Physical file: '%{PhysicalFile/}', Logical file: '%{LogicalFile/}' %1[: %{External/}%]%[, %{External/}%].
32607 The following system error occurred from a call to SetFilePointer: %1[ %{External/}%]%[, %{External/}%].
32608 The following system error occurred from a call to SetEndOfFile: %1[ %{External/}%]%[, %{External/}%].
32609 The following system error occurred from a call to CreateTimerQueue: %1[ %{External/}%]%[, %{External/}%].
32610 The following system error occurred from a call to DeleteTimerQueue: %1[ %{External/}%]%[, %{External/}%].
32611 The following system error occurred from a call to CreateTimerQueueTimer: %1[ %{External/}%]%[, %{External/}%].
32612 The following system error occurred from a call to DeleteTimerQueueTimer: %1[ %{External/}%]%[, %{External/}%].
32613 The following system error occurred from a call to RegisterWaitForSingleObject: %1[ %{External/}%]%[, %{External/}%].
32614 The following system error occurred from a call to UnRegisterWaitEx: %1[ %{External/}%]%[, %{External/}%].
32615 The following system error occurred from a call to BindIoCompletionCallback: %1[ %{External/}%]%[, %{External/}%].
32616 The following system error occurred from a call to PostQueuedCompletionStatus: %1[ %{External/}%]%[, %{External/}%].
32617 The following system error occurred from a call to CreateThread: %1[ %{External/}%]%[, %{External/}%].
32618 The following system error occurred from a call to CreateIoCompletionPort: %1[ %{External/}%]%[, %{External/}%].
32619 The following system error occurred from a call to CreateHeap: %1[ %{External/}%]%[, %{External/}%].
32620 The following system error occurred while obtaining memory status: %1[ %{External/}%]%[, %{External/}%].
32621 The '%{localeid/}' locale is not supported.
33031 The cell writeback operation has a non-trivial slice on the '%{measuregroupdimension/}' many-to-many measure group dimension, on the '%{measuregroup/}' measure group. Cell writeback operations to many-to-many dimensions are not allowed.
33032 The cell writeback operation has a non-trivial slice on the '%{measuregroupdimension/}' reference measure group dimension, on the '%{measuregroup/}' measure group. Cell writeback operations to reference dimensions are not allowed.
33033 The cell writeback operation has a non-trivial slice on the '%{measuregroupdimension/}' data mining measure group dimension, on the '%{measuregroup/}' measure group. Cell writeback operations to data mining dimensions are not allowed.
33034 The cell writeback operation has a non-trivial slice on the '%{cubedimension/}' dimension, which is not associated with the '%{measuregroup/}' measure group. Cell writeback operations to dimensions not associated with the measure group are not allowed.
33035 The cell writeback operation cannot be committed, because the '%{measuregroup/}' measure group does not have a write-enabled partition.
33036 The direct cell writeback operation cannot be committed, because the '%{measuregroup/}' measure group has no direct write-enabled partition.
33037 The cell writeback operation cannot update a cell to a NULL value.
33038 Cell writeback has failed because one of the cells is secured.
33039 The cell writeback operation has the non-sum measure named '%{measure/}' as the current coordinate, which is not allowed.
33040 The cell writeback operation cannot be performed on this cell (ordinal = '%{CellOrdinal/}').
33041 The cell writeback operation has a calculated member as current coordinate, which is not allowed.
33042 The cell writeback operation has failed because the underlying relational storage has a table whose number of columns differ from the number of columns that are actually expected, which is a data corruption.
33043 Unable to write back to a cell because the specified cell does not exist in the cube space.
33044 The cell writeback operation has a non-trivial slice and measure expression, on the '%{measuregroup/}' measure group. Cell writeback operations to measure expression for non-trivial slice are not allowed.
33045 The cell writeback operation has a weighted allocation to a 0 or null cell, which is not allowed.
35501 Standard Edition
35502 64 Bit Standard Edition
35503 Enterprise Edition
35504 64 Bit Enterprise Edition
35505 Developer Edition
35506 64 Bit Developer Edition
35507 Evaluation Edition
35508 64 Bit Evaluation Edition
35509 Local Cubes Edition
35510 64 Bit Local Cubes Edition
35520 Managed code execution
35522 Remote partitions
35523 Semi-additive measures
35525 Measure expressions
35526 Perspectives
35527 Dimension writeback
35528 Direct writeback
35529 Data Push
35530 Parallel Processing
35531 Third-party plug-in algorithms for data mining
35532 Microsoft Neural Network algorithm
35533 Microsoft Sequence Clustering algorithm
35534 Microsoft Time Series algorithm
35535 Microsoft Text Mining algorithm
35536 Microsoft Association Rules algorithm
35537 Microsoft Naive Bayes algorithm
35538 Parallel processing of data mining models
35539 No limit on the number of concurrent data mining queries.
35540 Flight Recorder
35541 Query Log
35542 Error Log
35543 Lazy Processing
35544 Linking inside same database
35545 Linking inside same server instance.
35546 Linking to other instance.
35547 Linking to other instance.
35548 Password Encryption
35549 Proactive Caching
35550 Network Binary XML
35551 Network Compression
35552 File Binary XML
35553 File Compression
35554 Unlimited data mining attributes.
35555 Multiple prediction targets
35556 Cross prediction across multiple time series.
35557 Sequence prediction
35558 Advanced algorithm parameters
35559 Parallel processing for certain Data Mining algorithm
35560 COM UDFs
35561 Backup
35562 Restore
35563 Synchronize
35564 CACHE
35565 Metadata translations
35566 Trace
35567 Microsoft Linear Regression algorithm
35568 Microsoft Logistic Regression algorithm
35901 SQL Server Analysis Services 2005 evaluation period has expired.
35902 The SKU is not valid.
35903 The '%{feature/}' feature is not included in the '%{sku/}' SKU.
35904 The '%{feature/}' feature is disabled by the '%{property/}' configuration property.
35905 A SKU violation has been discovered; this normally indicates an attempt to use features from a lower SKU version of the product that are usable only in a higher SKU version.
35906 Exceeded the maximum number of partitions in a measure group. The installed server editions allows not more than 3 partitions and not more than 1 writeback partition.
36901 The Context object cannot be used since there is no available server context. This typically occurs because the AdomdServer object model is not being used within a stored procedure.
36902 The CurrentCube property on the Context object cannot be used since there is no available cube context. This typically occurs because the stored procedure is not being called within an MDX/SQL query to a cube.
36903 The operation is allowed only in the context of CALL statement.
36904 Either an object with unique name '%{uniquename/}' does not exist, or the user does not have permissions to access the object.
37398 Operation completed successfully.
37399 Informational
37400 Warning
37401 Error
37402 Internal error:
37404 File system error:
37405 Memory error:
37408 OLE DB error:
37409 COM error:
37410 WinINet error:
37411 Message-handling subsystem:
37414 XML for Analysis parser:
37416 Parser:
37419 Errors in the back-end database access module.
37420 Errors in the high-level relational engine.
37421 Errors in the OLE DB provider.
37422 Errors in the metadata manager.
37423 Errors in the aggregation designer.
37424 Data mining
37425 Errors in performance monitor counter library.
37427 Pipeline support:
37428 :
37429 Trace:
37430 Server:
37431 Transaction errors:
37432 Backup and restore errors:
37433 Errors in the OLAP storage engine:
37434 Errors in managed code module:
37435 Messages from the OLAP engine.
37436 Errors from the SQL query module:
37437 Messages from the data mining engine:
37438 Errors the high-level relational engine.
37439 Errors in the compression library:
37440 Errors in the encryption library:
37441 Errors during parsing DIME headers.
37442 Errors in the rowset store.
37443 Errors in VBA expression services:
37444 Errors in cell writeback:
37445 Errors in BLS:
37446 Errors in BLS:
37447 Errors in the BLS:
37448 Errors related to feature availability and configuration:
